Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Sosyal Medya

volta ep 46

Q8 Volta EP 46 is an ultra-high performance synthetic (Group III) turbine oil. This product is developed for use in steam and gas turbines as well as combined cycle applications, including geared turbines. Due to the outstanding oxidative and thermal stability Q8 Volta EP 46 is specifically suitable for extreme operating conditions and high-temperature gas turbine operations. Designed as part of the Q8Oils clean technology program to ensure superior varnish/deposit control and good load carrying capabilities in combination with long oil life.

  • Industrial steam- and gas turbines, including geared turbines and combined cycle operations Hydroelectric turbines Circulation systems where turbine oil quality is required Centrifugal- and axial pumps, and turbo-compressors, where turbine oil quality is recommended
  • Extended oil life Superior oxidative stability, guaranteeing long oil life under continuous and severe operating conditions.
  • Enhanced technology Engineered with superior air release properties, exceptional anti-foaming performance and rapid water separation to ensure problem-free service.
  • Lower operational costs One product that combines exceptional thermal stability as needed for severe duty gas turbines as well as superior water separability for high performance steam turbine operations.
Properties Method Unit Typical
Appearance Visual  - Bright and Clear
ISO Viscosity Grade  -  - 46
Kinematic Viscosity, 40 °C D 445 mm²/s 46.0
Kinematic Viscosity, 100 °C D 445 mm²/s 7.6
Viscosity Index D 2270  - 131
Total Acid Number D 664 mg KOH/g 0.03
Pour Point D 97 °C -12
Flash Point, COC D 92 °C 240
Air Release, 50 °C D 3427 min 3
Emulsion, Distilled Water, 54.4 °C D 1401  - 40-40-0 (10)
Foam, 10 min settling, seq. 1-2-3 D 892 ml 0/0/0
Foam, 5 min blowing, seq. 1-2-3 D 892 ml 0/0/0
Rust Test, Proc. A and B, 24 h D 665  - pass
Copper Strip, 3 h, 100 °C D 130  - 1
FZG Test, A/8.3/90 DIN 51354 load stage 9

*The figures above are not a specification. They are typical figures obtained within production tolerances.