Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

kluberfood nh1 94-6000

Anasayfa > ürünler > kluber > kluberfood nh1 94-6000
Kategoriler
  • ki̇myasallar ve solventler
    • KLUBERFOOD NH1 94-6000
    KLUBERFOOD NH1 94-6000

    kluberfood nh1 94-6000

    Klüberfood NH1 94-6000 is a fluid grease based on a highly refined synthetic hydrocarbon and a special calcium complex soap thickener.

    Klüberfood NH1 94-6000 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 94-6000 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

    Due to its special composition, Klüberfood NH1 94-6000 offers an unusual combination of performance characteristics. The special thickener provides very good wear protection even at the very soft consistency of NLGI 000. At the same time, Klüberfood NH1 94- 6000 offers excellent corrosion protection along with good water resistance. This combination of special synthetic base materials enables optimum lubricant supply to the friction point also at low temperatures.

    • Klüberfood NH1 94-6000 was especially developed for applications in machines and installations of the food-processing and pharmaceutical industries where incidental contact with your product cannot be excluded. Klüberfood NH1 94-6000 is used e.g. as a fluid gear grease for the immersion lubrication of toothed and worm gears or chains that run more smoothly with a soft grease.
    • Klüberfood NH1 94-6000 is applied by brush, spatula, grease gun, grease cartridge or via central lubrication systems. Before applying Klüberfood NH1 94-6000, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions for H1 lubrication. If the production process does not allow cleaning we recommend the existing grease be replaced by purging the system during relubrication.
    • Overlubrication should generally be avoided. Please do not hesitate to contact us for KlüberServiceSystem support regarding lubricant quantities, relubrication procedures or grease miscibility. This product is also available in our automatic lubricant dispenser Klübermatic. Please consult the application engineering experts from Klüber Lubrication to determine whether Klübermatic might be used under the conditions in your processes.
    • Optimised lubricant supply to the friction point due to very soft consistency and good pumpability in central lubrication systems
    • Reduced wear and extended maintenance intervals due to good load-carrying capacity and good corrosion protection
    • Good low-temperature characteristics enable use in refrigerated environments
    • NSF-H1 registration for increased process reliability
    • ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant.
    Characteristics Klüberfood NH1 94-6000
    Article number 096115
    Composition, thickener calcium complex soap
    Composition, type of oil synthetic hydrocarbon oil
    Colour space brown
    Texture homogeneous , short fibrous
    Service temperature, lower limit -45 °C
    Service temperature, upper limit 120 °C
    NSF H1 registration number 143372
    Density, Klüber method: PN 024, 20°C approx. 0.88 g/cm³
    NLGI grade, DIN 51818 000
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 435 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 475 0.1 mm
    Kinematic viscosity of the base oil, 100°C, calculated data approx. 10 mm²/s
    Kinematic viscosity of the base oil, 40°C, calculated data approx. 60 mm²/s
    Copper corrosion, DIN 51811, 24 h, 100°C 1 - 100 - 24 corrosion degree
    FZG scuffing test, DIN ISO 14635-3, based on standard, A / 2.8 / 50, failure load stage ≥ 12
    Water resistance, DIN 51807-1, 3 h, 90°C 0 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 12 months

     

    kluberfood-nh1-94-6000.pdf