Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

kluberfood nh1 64-422

Anasayfa > ürünler > kluber > kluberfood nh1 64-422
Kategoriler
  • ki̇myasallar ve solventler
    • KLUBERFOOD NH1 64-422
    KLUBERFOOD NH1 64-422

    kluberfood nh1 64-422

    Klüberfood NH1 64-422 is a special lubricating grease composed of a synthetic base oil and silicate thickener. This special NSF H1 registered grease has been designed for the lubrication of rolling bearings under the varying operating conditions of the foodprocessing industry.

    Klüberfood NH1 64-422 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 64-422 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

    • Klüberfood NH1 64-422 is used for the lubrication of rolling bearings of machines and installations e.g. in the manufacture of grain, meal and animal feeds. It is intended for applications where there may be technically unavoidable contact with the food product.
    • The use of Klüberfood NH1 64-422, an NSF H1-registered lubricant, can contribute to a safe product regime when used in accordance with food manufacturing regulations.
    • Klüberfood NH1 64-422 is applied by standard commercial grease application equipment. e.g. spatula or grease gun.
    • Before applying Klüberfood NH1 64-422, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions exist, mandatory for foodsafe H1 lubrication.
    • If the production process does not allow cleaning we recommend the existing grease be replaced by purging the system during relubrication.
    • Please do not hesitate to contact your local Klüber representative in respect of grease miscibility, relubrication procedures etc.
    • Good wear protection and component life resulting from high base oil viscosity
    • Good sealing protection of bearing to prevent ingress of moisture and enhancing reliability
    • ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant
    Characteristics Klüberfood NH1 64-422
    Article number beige
    Texture homogeneous
    Service temperature, lower limit -30 °C
    Service temperature, upper limit 140 °C
    NSF H1 registration number 129522
    Density, Klüber method: PN 024, 20°C approx. 1.00 g/cm³
    NLGI grade, DIN 51818 2
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 265 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 6000 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 12000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 45 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 420 mm²/s
    Oil separation, DIN 51817 N, 168 h, 40°C ≤ 3 % by weight
    Flow pressure, DIN 51805-2, -30°C ≤ 1400 mbar
    Speed factor (n x dm) approx. 300000 mm/min
    Water resistance, DIN 51807-1, 3 h, 90°C 0 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 18 months

     

    kluberfood-nh1-64-422.pdf