MOLYBKOMBIN UMF SPRAY

MOLYBKOMBIN UMF Spray is used for highly loaded lubricating points such as chains, threaded spindles, bolts, screw connections and slideways, as well as for bearings subject to oscillation, high loads or surface pressure.
Shake MOLYBKOMBIN UMF Spray well before use. Provide for adequate ventilation as explosive mixtures may form. Do not spray on a naked flame or any incandescent material. Please also refer to safety data sheet and can label. MOLYBKOMBIN UMF Spray forms a soft, oil-like layer which becomes dry when exposed to high temperatures. Protect product against direct sunlight and temperatures above 50°C.

Characteristics	MOLYBKOMBIN UMF Spray
Article number	081001
Composition, propellant	propane-butane
Composition, solid lubricant	molybdenum disulphide
Composition, solvent	hydrocarbon
Composition, type of oil	polyalkylenglyco
Colour space	black
Service temperature, lower limit	-10 °C
Service temperature, upper limit	450 °C
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 40 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 350 mm²/s
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

kluber-molybkombin-umf-spray.pdf

Adınız Soyadınız

Şirket Adı

E-Mail Adresiniz

Telefon Numaranız

Mesajınız

Kvkk ve Aydınlatma Metni'ni okudum anladım.