Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

summit pgs 10a

Anasayfa > ürünler > kluber > summit pgs 10a
Kategoriler
  • ki̇myasallar ve solventler
    • SUMMIT PGS 10A

    summit pgs 10a

    Klüber Summit PGS 10A is a special polyglycol oil for the lubrication of mechanical seals. What makes this product stand out are its very low gas solubility and good cold flow properties. The base oil contained in Klüber Summit PGS 10A shows a high chemical stability with aggressive gas constituents, which may contact the oil.

    • Klüber Summit PGS 10A has been specially designed for the lubrication of process gas compressors where the mechanical seal is in contact with the oil circuit. Klüber Summit PGS 10A should be used in particular if the compressor is lubricated with Klüber Summit PGS 2, PGS 68 ... 220, PGI 68 ... 150 and NGL 444, 888 oils where good miscibility of the mechanical seal oil with the compressor oil is required.
    • Unlike mineral oils, polyalphaolefins or ester oils, the special base oil contained in Klüber Summit PGS 10A clearly reduces the solubility of hydrocarbon gases. The viscosity of the oil remains consistent for a long time, which contributes to reliable lubrication and a long service life of the mechanical seal.
    • Due to the good viscosity-temperature behaviour of Klüber Summit PGS 10A, compressor start-up is possible even at low ambient temperatures, which usually would require preheating of the oil when using mineral oils.
    • Reliable lubrication tailored to meet the requirements in mechanical seals
    • Miscible with Klüber Summit PGS, PGI and NGL gas compressor oils enabling safe and reliable operation
    • Low temperature start-up of equipment due to the good viscosity-temperature behaviour of the oil
    • Special additives prevent residue formation in the seal clearances
    Characteristics Klüber Summit PGS 10A
    Article number  050076
    Appearance clear
    Colour space colourless
    Density, DIN 51757, 20°C approx. 0.98 g/cm³
    Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 115 °C
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 2.5 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 8 mm²/s
    Viscosity index, DIN ISO 2909 ≥ 100
    Pour point, DIN ISO 3016 ≤ -51 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

     

    kluber-summit-pgs-10a.pdf