Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

summit ngl

Anasayfa > ürünler > kluber > summit ngl
Kategoriler
  • ki̇myasallar ve solventler
    • SUMMIT NGL

    summit ngl

    Klüber Summit NGL compressor lubricants are based on polyalkylene glycols and special additives.

    In high-pressure reciprocating compressors pumping natural gas or hydrocarbon-based process gas, petroleum based lubricants are easily absorbed into the gas stream and diluted by the gas. Klüber Summit NGL lubricants are extremely resistant to hydrocarbon dilution and gas stream absorption.

    The extremely high viscosity index of both products ensures efficient lubricity in a wide temperature range.

    • The Klüber Summit NGL series is designed for high pressure reciprocating compressors pumping natural gas, carbon dioxide or process gases (e.g. hydrogen, helium, nitrogen).
    • The Klüber Summit NGL series is designed for all oil-lubricated components in reciprocating compressors, e.g. cylinder, highpressure packing, bearings and engine. Please observe the manufacturer's viscosity specifications.
    • Owing to its low pour point, Klüber Summit NGL-444 is also suitable in case of very low ambient temperatures.
    • Klüber Summit NGL 555 and Klüber Summit 777 can be used for the lubrication of engines, cylinders and high-pressure packings according to the gas flow and the manufacturer's specifications.
    • Klüber Summit NGL-888 is particularly suitable for injection compressors used in oil and gas fields because it is water soluble and compatible with well-bore treatment fluids.
    • Due to the varying make-up of gases and operating conditions, please contact your local Klüber representative for specific product recommendations.
    • The Klüber Summit NGL series is also commonly used for Hydrogen applications.
    • For high pressure reciprocating compressors pumping natural gas, carbon dioxide or process gases
    • Extremely resistant to hydrocarbon dilution and absorption and good chemical resistance to process gases
    • Very high viscosity index, thus low viscosity change in a wide temperature range
    • Very good wear protection for longer component lifetime
    • Low residue formation for longer lifetime of valves and piston rings
    Characteristics Klüber Summit NGL 444 Klüber Summit NGL 555 Klüber Summit NGL 777 Klüber Summit NGL 888
    Article number 050021 050129 050130 050022
    Appearance clear  clear clear  clear 
    Colour space colourless colourless colourless yellow
    Density, DIN 51757, 20°C approx. 1.04 g/cm³ approx. 1.05 g/cm³ approx. 1.06 g/cm³ approx. 1.07 g/cm³
    Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 225 °C ≥ 250 °C ≥ 250 °C ≥ 250 °C
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 16 mm²/s approx. 19.4 mm²/s approx. 27.8 mm²/s approx. 40 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 79 mm²/s approx. 100 mm²/s approx. 150 mm²/s approx. 220 mm²/s
    Viscosity index, DIN ISO 2909 ≥ 208 ≥ 210 ≥ 215 ≥ 2220
    Pour point, DIN ISO 3016  ≤ -42 °C ≤ -39 °C ≤ -36 °C ≤ -33 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months 36 months 36 months

     

    kluber-summit-ngl.pdf