Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

unisilkon l 50_2

Anasayfa > ürünler > klüber > unisilkon l 50_2
Kategoriler
  • ki̇myasallar ve solventler
    • UNISILKON L 50_2
    UNISILKON L 50_2

    unisilkon l 50_2

    Manufacturers and operators in the wood, textile or paper industry have to lubricate rolling bearings subject to high temperatures. We designed UNISILKON L 50/2 to meet these requirements.

    UNISILKON L 50/2 is a high-temperature grease for rolling and plain bearings based on silicone oil and PTFE solid lubricants suitable for a wide service temperature range.

    The long-term grease UNISILKON L 50/2 has a good wetting ability on metal surfaces and offers good wear protection, resistance to ambient media and thermal stability. You can extend relubrication intervals and reduce cleaning and maintenance costs, so UNISILKON L 50/2 can reduce your operating costs.

    • Made of special raw materials to ensure long-term and for-life lubrication at high temperatures
    • Wear reduction for increased component availability due to its good pressure absorption capacity
    • Versatile use due to good compatibility with aqueous solutions
    Characteristics UNISILKON L 50/2
    Article number 022095
    Composition, solid lubricant PTFE
    Composition, type of oil silicone oil
    Colour space white
    Texture almost homogeneous , short fibrous
    Service temperature, lower limit -50 °C
    Service temperature, upper limit 200 °C
    Density, Klüber method: PN 024, 20°C approx. 1.25 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 265 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 25°C approx. 200 mm²/s
    Copper corrosion, DIN 51811, 24 h, 150°C 1 - 150 - 24 corrosion degree
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
    Flow pressure, DIN 51805-2, -50°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 250 °C
    Speed factor (n x dm) approx. 500000 mm/min
    Media resistance, medium cold water / hot water / water steam up to approx. 130°C passed
    Water resistance, DIN 51807-1, 3 h, 90°C ≤ 1 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

     

    kluber-unisilkon-l-50_2.pdf
    • UNISILKON L 50/2 is a long-term lubricating grease for rolling bearings subject to high thermal stress. It has proven effective in applications in the wood, textile and paper industries. UNISILKON L 50/2 can also be used for plain bearings in metal/plastic material combinations and as assembly aid for rubber parts like seals.
    • UNISILKON L 50/2 is resistant to hot and cold water and water vapour. It is not resistant to most organic solvents, strong acids and alkaline solutions.
    • UNISILKON L 50/2 is neutral towards most metals, thermoplastics and elastomers. Owing to the many different elastomer and plastic compositions their compatibility should be checked prior to series applications. UNISILKON L 50/2 can be applied by means of spatula, brush, usual metering devices or the tampon printing method. Please observe the material safety data sheet.