Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

syntheso 8002 (brückenl-auqlit)

Anasayfa > ürünler > klüber > syntheso 8002 (brückenl-auqlit)
Kategoriler
  • ki̇myasallar ve solventler
    • SYNTHESO 8002 (BRÜCKENL-AUQLIT)

    syntheso 8002 (brückenl-auqlit)

    SYNTHESO 8002 (plain bearings in bridges) is a special lubricating grease based on silicone oil and lithium soap. It can be used for plain bearings in bridges and upper works requiring an approved lubricant. Each grease batch is tested, approved and certified by the Materials Testing Institute in Stuttgart, Germany.

    • SYNTHESO 8002 (plain bearings in bridges) is used for the lubrication of bridge bearings with PTFE/steel contact. SYNTHESO 8002 (plain bearings in bridges) is compatible with many rubberelastic materials. All data are based on our current knowledge and experience. They were determined by means of sampling tests. Owing to the many different elastomer and grease compositions we recommend checking their compatibility under application-effective influences on the complete component prior to series application preferably in the entire component under production-related conditions.
    • The grease can be applied by brush or spatula onto the clean and degreased surface.
    • Good ageing resistance
    • Good wetting power
    • Smooth running of components at low temperatures
    • Special grease approved for plain bearings in bridges – MPA certificate
    Characteristics SYNTHESO 8002 (BRÜCKENL.QUALIT)
    Article number 012043
    Composition, thickener lithium soap
    Composition, type of oil silicone oil
    Colour space white
    Texture short fibrous
    Service temperature, lower limit 40 °C
    Service temperature, upper limit 130 °C
    Density, Klüber method: PN 024, 20°C  approx. 1.01 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit  265 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm
    Oil separation, ASTM D6184, based on standard, 24 h, 100°C ≤ 3 % by weight
    Dropping point, DIN ISO 2176 / IP 396 ≥ 180 °C
    Oxidation stability, ASTM D942, based on standard, 160°C, pressure drop ≤ 1 bar
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx 36 months

     

    kluber-syntheso-8002-(bruckenl_auqlit).pdf