Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

staburags nbu 30 ptm

Anasayfa > ürünler > klüber > staburags nbu 30 ptm
Kategoriler
  • ki̇myasallar ve solventler
    • STABURAGS NBU 30 PTM

    staburags nbu 30 ptm

    STABURAGS NBU 30 PTM is an assembly grease containing a solid lubricant. It is resistant to water and protects against tribo-corrosion (fretting corrosion). It has proven effective in outdoor applications subject to high humidity.

    • STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, e.g. in railway bogie assemblies.
    • STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods.
    • STABURAGS NBU 30 PTM facili-ates assembly and disassembly of ABS sensors in vehicles.
    • Use the aerosol spray version of STABURAGS NBU 30 PTM for relubrication of railway brake parts where no grease nipple is incorporated. For optimum penetration into fine clearances we recommend spraying for at least 8 seconds. This will increase efficiency of brake rods in rail vehicles thus ensuring the longest maintenance intervals.
    • When used for assembly and lubricating purposes we recommend the lubricant be lightly applied to the component surfaces via a lint free cloth, by hand, or by brush.
    • STABURAGS NBU 30 PTM shows good adhesive strength at low temperatures down to min. -55 °C.
    • Assembly grease protecting against tribo-corrosion
    • Good corrosion protection
    • Excellent resistance to water even under outdoor conditions
    • Approved by the company Knorr Bremse, N 12006-37
    Characteristics STABURAGS NBU 30 PTM STABURAGS NBU 30 PTM Spray
    Article number 017069 081275
    Composition solid lubricant solid lubricant
    Composition, thickener  barium complex soap barium complex soap
    Composition, type of oil mineral oil mineral oil
    Colour space grey grey
    Service temperature, lower limit  -10 °C -10 °C
    Service temperature, upper limit 160 °C 160 °C
    Density, Klüber method: PN 024, 20°C approx. 1.10 g/cm³ approx. 1.10 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 245 0.1 mm 245 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 275 0.1 mm 275 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹ approx. 15000 mPas approx. 15000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 31 mm²/s approx. 31 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 490 mm²/s approx. 490 mm²/s
    Dropping point, DIN ISO 2176 / IP 396 ≥ 220 °C ≥ 220 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 60 months 24 months

     

    kluber-staburags-nbu-30-ptm.pdf