Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

nontrop rb 3 din e

Anasayfa > ürünler > klüber > nontrop rb 3 din e
Kategoriler
  • ki̇myasallar ve solventler
    • NONTROP RB 3 DIN E

    nontrop rb 3 din e

    NONTROP RB 3 DIN E is a thermally stable lubricating, sliding and sealing agent based on mineral oil and thickened with a thermally very stable silicate and solid lubricant.

    • NONTROP RB 3 DIN E is used as lubricant, sliding and sealing agent in gas equipment of all categories including the additional fittings contained in them or intended to be fitted in them which can come into contact with fuel gases. Such fittings include ball, taper plug and other valves in cooking and heating installations, etc., with an operating temperature from 0 °C to 140 °C acc. to EN 377 that are used with fuel gases or gas mixtures such as natural or town gas as well as propane and butane as specified in DVGW worksheet G 260.
    • Carefully clean and degrease the friction points prior to initial lubrication. Then apply a thin and uniform layer of NONTROP RB 3 DIN E by means of brush, spatula or suitable metering system to all friction points of the component.
    • Tested and approved by DVGW acc. to DIN EN 377 class D
    • Very good and durable wetting of friction points
    • Neutral towards copper and its alloys
    • High thermal stability
    • Neutral towards DIN EN 377 elastomers, e.g. SRE-NBR 1
    • Contains solid lubricant to compensate for roughness peaks and areas subject to elevated load
    Characteristics NONTROP RB 3 DIN E
    Article number 001045
    Composition, solid lubricant silicate , solid lubricant
    Composition, type of oil mineral oil
    Colour space black
    Texture  homogeneous
    Service temperature, lower limit -10 °C
    Service temperature, upper limit  140 °C
    Density, Klüber method: PN 024, 20°C approx. 1.1 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 230 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 255 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 7500 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 11500 mPas
    Copper corrosion, DIN 51811, 24 h, 140°C ≤ 2 - 140 - 24 corrosion degree
    Oil separation, ASTM D6184, 30 h, 100°C ≤ 1 % by weight
    Dropping point, DIN ISO 2176 / IP 396 ≥ 240 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    kluber-nontrop-rb-3-din-e.pdf