Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

klubersynth bem 44-4600

Anasayfa > ürünler > klüber > klubersynth bem 44-4600
Kategoriler
  • ki̇myasallar ve solventler
    • KLUBERSYNTH BEM 44-4600

    klubersynth bem 44-4600

    Do you operate low-speed gearboxes and bearings under demanding conditions, e.g. strong vibrations, low or constantly changing ambient temperatures? Often those applications are located where maintenance is complicated and its reduction to a minimum is therefore desirable.

    Klübersynth BEM 44-4600 is a modern high-performance fluid grease based on a high-viscosity synthetic hydrocarbon oil and a special lithium soap, which opens up new possibilities for ensuring a reliable operation of your installations.

    Carefully selected additives provide Klübersynth BEM 44-4600 with an exceptional scuffing resistance. Klübersynth BEM 44-4600 has passed both the scuffing load test acc. to DIN ISO 14635-3 for fluid gear greases and the standard scuffing test acc. to DIN ISO 14635- 1 for gear oils with top ratings. Klübersynth BEM 44-4600 protects your components reliably against wear, even when subjected to oscillating movements.

    When switching from a conventional gear oil to Klübersynth BEM 44- 4600 maintenance works to replace seals are reduced to a minimum. Here, Klübersynth BEM 44-4600 offers you a high operational reliability and significant cost reduction. It is very resistant to oxidation at high temperatures and is also suitable for low temperatures.

    Your technical challenges may be found in general industrial equipment, machine tools, heavy industry equipment (mining and cement), robotics, chemical and agricultural machinery.

    Examples are:

    • Crushers, vertical roller mills, hammer mills
    • Mobile drilling equipment
    • Cranes, e.g. harbour or mining
    • Mixer and reactor drives
    • Harvesting machines
    • Conveyor belt drives

    You can apply Klübersynth BEM 44-4600 by an automatic lubrication system or via an automatic single-point lubrication system. If you wish to optimise the service life of your equipment or have any other questions regarding your application, our experts will be pleased to help you with application-specific advice.

    • Excellent scuffing resistance similar to that of a gear oil
    • Special additives ensure excellent wear protection of gear teeth and bearings
    • Better sealing effect than with gear oils
    • Wide service temperature range due to modern fully-synthetic base oil
    Characteristics Klübersynth BEM 44-4600
    Article number 004319
    Composition, thickener lithium complex soap
    Composition, type of oil synthetic hydrocarbon oil
    Colour space beige
    Texture homogeneous
    Service temperature, lower limit -50 °C
    Service temperature, upper limit 140 °C
    Density, Klüber method: PN 024, 20°C approx. 0.86 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 400 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 430 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 56 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 500 mm²/s
    Viscosity index, DIN ISO 2909, base oil approx. 180
    Copper corrosion, ASTM D4048, based on standard, 24 h, 100°C 1 - 100 - 24 corrosion degree
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
    Flow pressure, DIN 51805-2, -50°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 180 °C
    Antibrinelling test, Klüber method: 24 Hz / 8000 N / ±3°, equipment: SNR FEB 2, 50 h, 20°C, wear approx. 0 mg
    Four-ball tester: wear characteristics, ASTM D2266, based on standard, 1200 min⁻¹ / 40 kgf, 60 min, 75°C, wear scar diameter ≤ 0.6 mm
    Four-ball tester, welding load, ASTM D2596 ≥ 250 kgf
    FZG scuffing test, DIN ISO 14635-1, A / 8.3 / 90, failure load stage > 13
    FZG scuffing test, DIN ISO 14635-3, A / 2.8 / 50, failure load stage > 12
    FZG wear test, DGMK 377-01, based on standard, C / 0.05:0.57 / room temperature / 12, wear category low
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx 24 months

     

    klubersynth-bem-44-4600.pdf