Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.
Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye
For you as a manufacturer of car interior components, the reduction of odorous emissions is becoming ever more of an issue. Lubricants supporting the optimum function of your components play an important role in this respect.
We have therefore optimised the olfactory characteristics of Klüberplex RA 41-151 and designed it to reduce friction and wear in plain bearings, guide rails, mechanisms and actuators made of plastic and/or metal.
Furthermore, some special factors should be considered when lubricating plastic components. Since metal and plastic show different behaviour in several decisive ways, any lubricant to be used with plastics has to be adjusted accordingly. Compared with metal, plastics are rather soft. Solid lubricants have a positive effect in many metal friction points; on plastic surfaces, by contrast, their effect may be non-existent or even detrimental. Klüber Lubrication developed Klüberplex RA 41-151, which is free of solid lubricants and offers good adhesion.
| Characteristics | Klüberplex RA 41-151 |
| Article number | 020365 |
| Composition, thickener | lithium complex soap |
| Composition, type of oil | mineral oil , synthetic hydrocarbon oil |
| Colour space | beige |
| Odour, VDA 270, based on standard, 2 h, 100°C | ≤ 3 |
| Service temperature, lower limit | -50 °C |
| Service temperature, upper limit | 130 °C |
| Density, Klüber method: PN 024, 20°C | approx. 0.85 g/cm³ |
| UV control, wave length: 366 nm | according to reference |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit | 310 0.1 mm |
| Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit | 340 0.1 mm |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit | 1800 mPas |
| Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit | 3000 mPas |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C | approx. 18.5 mm²/s |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 150 mm²/s |
| Flow pressure, DIN 51805-2, -50°C | ≤ 1400 mbar |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 250 °C |
| Water resistance, DIN 51807-1, 3 h, 90°C | ≤ 1 - 90 rating |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 36 months |
TR 
EN