Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

kluberbeta vr 67-3500

Anasayfa > ürünler > klüber > kluberbeta vr 67-3500
Kategoriler
  • ki̇myasallar ve solventler
    • KLUBERBETA VR 67-3500
    KLUBERBETA VR 67-3500

    kluberbeta vr 67-3500

    Klüberbeta VR 67-3500 is a soft white adhesive silicone grease. The particular consistency and the use of special silicone oils ensure reliable operation over a wide temperature range for sanitary, beverage and heating valves and taps. Klüberbeta VR 67-3500 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberbeta VR 67-3500 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

    Prolonged service life of cartridges, valves and fittings due to

    • continuous wetting of the friction surfaces
    • compatibility with most standard elastomers and plastics
    • friction and wear reduction in most material combinations

    Prevents stick-slip and provides balanced damping of operation

    • temperature has little effect on lubricating film thickness

    Certified for use in drinking water and beverage taps

    • according to BWGL-KTW (UBA-guideline) (German Environmental Agency), NSF/ANSI/CAN 61, ACS, AS 4020
    • further certification available on request

    NSF H1 registered supporting process reliability

    Characteristics Klüberbeta VR 67-3500
    Article number 022224
    Composition, solid lubricant PTFE , silicate
    Composition, type of oil silicone oil
    Colour space white
    Service temperature, lower limit -40 °C
    Service temperature, upper limit 140 °C
    NSF H1 registration number  144018
    Density, Klüber method: PN 024, 20°C approx. 1.05 g/cm³
    NLGI grade, DIN 51818 00
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 17000 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 25000 mPas
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    kluberbeta-vr-67-3500.pdf
    • Klüberbeta VR 67-3500 is suitable for drinking water and beverage taps as well as in heating installations whenever complex friction geometries require a fluid grease distribution.
    • Typical applications include the lubrication of ceramic discs, e.g. in single lever mixer taps, piston mixers, shower valves, thermostats, and similar components.
    • Klüberbeta VR 67-3500 generally provides load-bearing lubricating films up to 2.5 N/mm² under normal operating conditions in the industry. Depending on the design, this value can also be exceeded.
    • Due to its consistency, Klüberbeta VR 67-3500 is particularly suitable as assembly lubricant for seals, O rings and seal packings. It also reduces friction and wear in other components like plastic taps, packings and laboratory equipment.
    • Klüberbeta VR 67-3500 is neutral towards most metals, thermoplastics and elastomers. Owing to the many different elastomer and plastic compositions their compatibility should be checked prior to series applications. Klüberbeta VR 67-3500 can be applied by means of spatula, brush, usual metering devices or the tampon printing method. Please observe the material safety data sheet.