GRAFLOSCON A-G 1 ULTRA

GRAFLOSCON A-G 1 ULTRA has been developed as a priming lubricant for large open girth gear and pinion drives. It can also be used as a contrast lubricant to check the load-carrying pattern during the alignment of large drives.
GRAFLOSCON A-G 1 ULTRA is also a lubricant for open rollingcontact gears (e.g. winches), slideways, racks, large chain drives and wire ropes.
GRAFLOSCON A-G 1 ULTRA is applied by brush or spatula. Surface protection is best if the faces to be lubricated are cleaned before applying the lubricant by short-bristled brush.
GRAFLOSCON A-G 1 ULTRA is unsuitable for application via common centralised lubrication systems or spraying equipment; you can, however, use a manual lever-type grease gun.

Ready-to-use product - no product preparation required
High load-carrying capacity and adhesiveness - prevents metal-to-metal contact of tooth flanks
Long durability of lubricating film - protects tooth flanks even during prolonged gear alignment procedures
Priming and contrast lubricant - for determining the parallel alignment of tooth flanks

Characteristics	GRAFLOSCON A-G 1 ULTRA
Article number	039062
Solid lubricants	approx. 25 % by weight
Colour space	black
Texture	homogeneous , short fibrous
Functional lubricant film	approx. -40 °C
Service temperature, lower limit	-15 °C
Thermal stability of the lubricating film, depends on the relubrication	approx. 200 °C
Density, Klüber method: PN 024, 20°C	approx. 1.07 g/cm³
NLGI grade, DIN 51818	1
Kinematic viscosity of the base oil, 40°C, calculated data	approx. 500 mm²/s
Dropping point, DIN ISO 2176 / IP 396	≥ 220 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months

kluber-grafloscon-a-g-1-ultra.pdf

Adınız Soyadınız

Şirket Adı

E-Mail Adresiniz

Telefon Numaranız

Mesajınız

Kvkk ve Aydınlatma Metni'ni okudum anladım.