Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

barrierta i mi fluid

Anasayfa > ürünler > klüber > barrierta i mi fluid
Kategoriler
  • ki̇myasallar ve solventler
    • BARRIERTA I MI FLUID

    barrierta i mi fluid

    BARRIERTA is Europe's oldest high-quality brand of hightemperature lubricants based on perfluorinated polyether oil (PFPE). The name of BARRIERTA is widely regarded as synonymous with long-term stability and thermal resistance. BARRIERTA products are among the most widely used PFPE lubricants today.

    BARRIERTA Fluids are based on highly refined PFPE oils. Thanks to their excellent thermal stability and availability in four different viscosity grades, BARRIERTA Fluids have proven successful for many years in a large variety of applications.

    BARRIERTA I SFLUID is NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of BARRIERTA I SFLUID can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

    Extended service life possible due to

    • excellent thermal stability
    • low evaporation rates

    Wide application range due to

    • availability in four viscosity grades
    • compatibility with a wide range of plastics and elastomer materials
    Characteristics BARRIERTA I S FLUID BARRIERTA I MI FLUID BARRIERTA I EL FLUID BARRIERTA 0 FLUID
    Article number 090004 090003 090002 090001
    Composition, type of oil PFPE PFPE PFPE PFPE
    Appearance clear clear clear clear
    Colour space colourless colourless colourless colourless
    Service temperature, lower limit  -25 °C -25 °C -40 °C -60 °C
    Service temperature, upper limit 260 °C 220 °C 180 °C 100 °C
    NSF H1 registration number 136762  -  -  -
    Density, DIN 51757, 20°C approx. 1.91 g/cm³ approx. 1.9 g/cm³ approx. 1.9 g/cm³ approx. 1.88 g/cm³
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 43 mm²/s approx. 22 mm²/s approx. 12 mm²/s approx. 4.5 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 425 mm²/s approx. 205 mm²/s approx. 98 mm²/s approx. 28 mm²/s
    Viscosity index, DIN ISO 2909 ≥ 120 ≥ 120 ≥ 100 ≥ 75
    Pour point, DIN ISO 3016 ≤ -30 °C ≤ -30 °C ≤ -45 °C ≤ -60 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 60 months 60 months 60 months 60 months
    kluber-barrierta-i-mi-fluid.pdf
    • BARRIERTA Fluids attain long service lives in rolling bearings, plain bearings, sintered metal bearings and guides subject to extreme temperatures or aggressive chemicals.
    • Owing to their low vapour pressures, and depending on the viscosity grade, BARRIERTA Fluids are also suitable for high-vacuum applications.
    • Electrical contacts BARRIERTA Fluids offer long-term protection against wear on electrical contacts, especially those with gold surfaces. There are no known decomposition products that would have an insulating effect on the contacts.
    • Chains BARRIERTA I S Fluid is suitable for the lubrication of hightemperature chains and even meets stringent hygiene requirements. BARRIERTA IS Fluid is non-toxic and non-odorous.
    • Plastic-plastic friction points BARRIERTA Fluids are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber). A negative impact on materials is not to be expected. Nevertheless, we recommend testing the lubricant's compatibility with the materials in question prior to series application.
    • We recommend cleaning all parts to operate in contact with the lubricant with white spirit 180/210 and/or Klüberalfa XZ 3-1. Upon cleaning, apply clean compressed air or hot air to remove any residues. The friction point should be clean and bright (i.e. free from oil, grease or perspiration) and free from contamination particles to ensure optimum function.