Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

syntheso glk

Anasayfa > ürünler > kluber > syntheso glk
Kategoriler
  • ki̇myasallar ve solventler
    • SYNTHESO GLK
    SYNTHESO GLK

    syntheso glk

    SYNTHESO GLK 0 and GLK 1 are special lubricating greases for a wide variety of applications with an almost neutral behaviour towards many elastomers (also EPDM) and plastics. Both products offer excellent wear protection, high load-carrying capacity, good adhesion and resistance to water.

    SYNTHESO GLK 0 and GLK 1 have been designed for the lubrication of elastomer – metal, plastic – metal, plastic – plastic, as well as metal – metal sliding material combinations. The products are typically used in the automotive industry as assembly greases for plain bearings. E.g. in brake and clutch systems for linear motion in contact with brake fluids DOT 3, 4 and 5.1. Application examples: guide bushes, bolts, EPDM and SBR seals, clutch master and slave cylinders, corrosion protection of brake shoe supports in disc brake callipers. In all such applications, SYNTHESO GLK0 and GLK1 facilitate damage free assembly and provide reliable long term ubrication. SYNTHESO GLK 0 and GLK 1 can also be used for the lubrication of plain bearings with low sliding velocities and for the lubrication of small plastic gears.

    • Special lubricants for the assembly and lifetime lubrication of elastomers
    • Almost neutral towards EPDM/metal or plastic sliding material combinations
    Characteristics  SYNTHESO GLK 0 SYNTHESO GLK 1
    Article number 012134 012126
    Composition, thickener lithium complex soap lithium complex soap
    Composition, type of oil polyalkylenglyco polyalkylenglyco
    Colour space beige beige
    Texture fibrous , homogeneous homogeneous , long fibrous
    Service temperature, lower limit -40 °C -40 °C
    Service temperature, upper limit  150 °C 150 °C
    Density, Klüber method: PN 024, 20°C approx. 0.97 g/cm³  approx. 0.97 g/cm³ 
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 355 0.1 mm 285 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 375 0.1 mm 315 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 363 mm²/s approx. 363 mm²/s
    Dropping point, DIN ISO 2176 / IP 396  ≥ 220 °C ≥ 250 °C
    Water resistance, DIN 51807-1, 3 h, 90°C ≤ 1 - 90 rating ≤ 1 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months

     

    kluber-syntheso-glk.pdf