SYNTHESO GLEP 1

SYNTHESO GLEP has been designed for the lubrication of metal – metal; elastomer – metal, plastic – metal, plastic – plastic sliding material combinations. The product is typically used in the automotive industry as assembly grease for plain bearings, e.g. in brake and clutch systems for linear motion in contact with brake fluids DOT 3, 4 and 5.1. Application examples: guide bushes and bolts, EPDM and SBR seals, clutch master and slave cylinders, corrosion protection of brake pad supports in disc brake calipers, brake boosters and noise reduction in elastic axle bearings, seals of steering columns.
In such applications, SYNTHESO GLEP 1 facilitates assembly and provides reliable lubrication. Due to its good resistance to EPDM elastomers, SYNTHESO GLEP 1 is mainly used
in car brakes as it offers good advantages versus silicone greases, like better load-carrying capacity, good adhesion and compatibility with electric contacts

Special lubricating grease for the assembly and lifetime lubrication of elastomers
Almost neutral towards most sliding material pairings like EPDM/metal or plastic
Reduces friction and wear

Characteristics	SYNTHESO GLEP 1
Article number	012142
Composition, thickener	lithium complex soap
Composition, type of oil	polyalkylenglycol
Colour space	beige
Texture	fibrous, homogeneous
Service temperature, lower limit	-50 °C
Service temperature, upper limit	150 °C
Density, Klüber method: PN 024, 20°C	approx. 0.97 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	280 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	310 0.1 mm
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit	3000 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit	5500 mPas
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 360 mm²/s
Copper corrosion, DIN 51811, 24 h, 100°C	1 - 100 - 24 corrosion degree
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree
Flow pressure, DIN 51805-2, -45°C	≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396	≥ 220 °C
Water resistance, DIN 51807-1, 3 h, 90°C	≤ 1 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months

kluber-syntheso-glep-1.pdf

Adınız Soyadınız

Şirket Adı

E-Mail Adresiniz

Telefon Numaranız

Mesajınız

Kvkk ve Aydınlatma Metni'ni okudum anladım.