Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

soflex pdl 300 a

Anasayfa > ürünler > kluber > soflex pdl 300 a
Kategoriler
  • ki̇myasallar ve solventler
    • SOFLEX PDL 300 A

    soflex pdl 300 a

    ISOFLEX PDL 300 A is a synthetic high-performance grease for low temperatures. It consists of ester oil and lithium soap. Owing to its well-balanced texture and consistency, this special grease ensures uniformly low starting and running torques.

    • ISOFLEX PDL 300 A is suitable for plain and rolling bearings, and for sliding points such as cams, bolts, meters, cam plates, and adjusting rings used in automotive, telecommunications and precision engineering, in instruments, and in cryotechnology applications.
    • The lubricant is applied by brush, spatula, or grease gun. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application.
    • For low temperatures
    • Uniformly low starting and running torque
    • Resistant to ageing and oxidation
    • Good corrosion protection
    Characteristics ISOFLEX PDL 300 A
    Article number 004074
    Colour space yellow
    Texture homogeneous
    Service temperature, lower limit -70 °C
    Service temperature, upper limit 110 °C
    Density, Klüber method: PN 024, 20°C approx. 0.94 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 280 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 320 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 1000 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 2500 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 2.6 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 7.5 mm²/s
    Copper corrosion, DIN 51811, 24 h, 100°C 1 - 100 - 24 corrosion degree
    Flow pressure, DIN 51805-2, -70°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 180 °C
    Speed factor (n x dm) 1000000 mm/min
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

     

    kluber-isoflex-pdl-300-a.pdf