Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

klubersynth hlr 46-371

Anasayfa > ürünler > kluber > klubersynth hlr 46-371
Kategoriler
  • ki̇myasallar ve solventler
    • KLUBERSYNTH HLR 46-371

    klubersynth hlr 46-371

    Klübersynth HLR 46-371 is an adhesive, pliant and high-temperature resistant special lubricating grease. Due to the product composition (base oil: polyalkylene glycol oil; thickener: special lithium soap) it is possible to use it in context with many elastomers which are sensitive to mineral oil (particularly EPDM) and plastics.

    Outstanding performance data:

    • very wide service temperature range
    • good corrosion protection
    • good water resistance
    • excellent oxidation stability

    Elastomer/metal or plastic/metal sliding material combinations, eg in car components

    • brake boosters
    • drum brakes
    • disc brakes
    • main brake cylinders
    • ABS
    • small gears (metal/plastic)
    • rolling bearings with EPDM sealing disks
    • radial shaft seals with EPDM elastomer

    Compatibility with elastomers and plastics: The following elastomers were tested 168 h for compatibility with Klübersynth HLR 46-371 at 100 and 150°C. We recommend checking the compatibility of the lubricating grease and the contacting material, especially prior to series applications (our test results were obtained with samples and are not a substitute for your own testing).

    • Lubricating and assembly paste
    • Service temperature range – 40 / 150 °C
    • For elastomer/metal sliding material combinations
    Characteristics Klübersynth HLR 46-371
    Article number 012191
    Composition, thickener lithium complex soap
    Composition, type of oil polyalkylenglycol
    Colour space red
    Texture fibrous , homogeneous
    Service temperature, lower limit -40 °C
    Service temperature, upper limit 150 °C
    Density, Klüber method: PN 024, 20°C approx. 0.97 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 280 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 310 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 57.5 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 363 mm²/s
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
    Flow pressure, DIN 51805-2, -40°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 220 °C
    Speed factor (n x dm) approx. 300000 mm/min
    Water resistance, DIN 51807-1, 3 h, 90°C ≤ 1 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

     

    klubersynth-hlr-46-371.pdf