KLUBERSYNTH HIP 84-401

For friction pairings operating under high loads, in particular plastic/plastic, plastic/metal or metal/metal, e.g. joints. Dampening in car interior, gear shifting gate, control knobs, guide rails, small gears. For c.v. joints in longitudinal and axle shafts. Compensation of tolerances.
The application of Klübersynth HIP 84-401 allows a pleasant and high-quality switching feel.
Compatibility with plastics: Compatibility tests showed a neutral behaviour towards most plastic materials. Owing to the many different types of plastic, their compatibility and interaction with the lubricant in contact should be checked prior to series application.
Klübersynth HIP 84-401 can be applied by brush, spatula, grease gun, metering gun, automatic metering devices, grease cartridge, common metering systems.

Thermally stable; peaks to 180 °C

Lower frictional resistance

Noise dampening

Characteristics	Klübersynth HIP 84-401
Article number	004267
Composition, type of oil	synthetic hydrocarbon oil
Colour space	white
Service temperature, lower limit	-50 °C
Service temperature, upper limit	160 °C
Density, Klüber method: PN 024, 20°C	approx. 1.10 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	295 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	325 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 40 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 400 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree
Flow pressure, DIN 51805-2, -50°C	≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396	≥ 250 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months

klubersynth-hip-84-401.pdf

Adınız Soyadınız

Şirket Adı

E-Mail Adresiniz

Telefon Numaranız

Mesajınız

Kvkk ve Aydınlatma Metni'ni okudum anladım.