Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

klubersynth h 46-463

Anasayfa > ürünler > kluber > klubersynth h 46-463
Kategoriler
  • ki̇myasallar ve solventler
    • KLUBERSYNTH H 46-463
    KLUBERSYNTH H 46-463

    klubersynth h 46-463

    As a manufacturer of powertrain damping systems such as twomass flywheels or crankshaft dampers, you need a lubricant which complies with the high requirements in terms of wear, damping and service life.

    With Klübersynth H 46-463 we offer you a special lubricant based on fully synthetic oils, which fulfills the modern requirements of the automotive industry for vibration absorption, damping and service life of your components. Klübersynth H 46-463 contributes to reducing wear under extreme loads and shows good compatibility with frequently used plastics and seals in clutches.

    • Klübersynth H 46-463 was especially developed for use in two-mass flywheels and torsion dampers in order to dampen vibrations caused by the rotational irregularities in current automotive engine models.
    • The friction point should be cleaned with appropriate detergents prior to lubricating the components with Klübersynth H 46-463. Then lubrication can be carried out manually or with automatic metering systems. Prior to series application we recommend checking the pumpability in automatic lubricating systems and the compatibility of the materials in contact with the lubricant.
    • The colour of products manufactured using chemical processes may vary due to chemical/physical effects such as UV radiation. However, none of these colour variations is an indicator of altered product quality.

    Extended component life due to

    • shear stability of the special lubricant
    • controlled low oil separation
    • high tolerance for temperature peaks

    Very good noise damping and high comfort in the vehicle interior due to

    • modern and load-resistant soap concept
    • consistency of the special lubricating grease (NLGI 3)
    • constantly low friction coefficient
    Characteristics Klübersynth H 46-463
    Article number 012332
    Composition, thickener  lithium complex soap
    Composition, type of oil  polyalkylenglycol
    Colour space beige
    Texture fibrous , homogeneous
    Service temperature, lower limit -30 °C
    Service temperature, upper limit  150 °C
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 220 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 250 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 80 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 460 mm²/s
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
    Oil separation, ASTM D6184, based on standard, 30 h, 150°C ≤ 2 % by weight
    Flow pressure, DIN 51805-2, -30°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 250 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    klubersynth-h-46-463.pdf