Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

klubersynth beh 42-232

Anasayfa > ürünler > kluber > klubersynth beh 42-232
Kategoriler
  • ki̇myasallar ve solventler
    • KLUBERSYNTH BEH 42-232

    klubersynth beh 42-232

    Your experience with lithium soap products has been very positive, which is why you would like to stick to this technology also in the face of increasing requirements. This kind of experience has also been the basis of the development of Klübersynth BEH 42-232. What's new in this product is the combination of a lithium complex soap with a special, fully synthetic base oil mixture consisting of ester and ether oils. Moreover, the carefully selected additives prevent premature material fatigue, enabling longer component life even at elevated temperatures and loads. With its wide service temperature range from -40 °C to +180 °C in combination with excellent wear and corrosion protection, Klübersynth BEH 42-232 is a high-performance grease for a wide range of challenging applications.

    Klübersynth BEH 42-232 was especially developed for the long-term or for-life lubrication of heavily loaded rolling bearings. Because of its performance characteristics proven on FAG FE8 and FAG FE9 rolling bearing testers, Klübersynth BEH 42-232 is preferably used in rolling bearing applications with both linear or point-to-point contact.
    Such for-life-lubricated rolling bearings are found e.g. in

    • machines for agriculture and the building industry
    • conveyors
    • textile and paper making-machines
    • wheel bearing applications

    Tried-and-tested lithium-based lubrication with innovative composition

    • Longer relubrication intervals than with conventional lithium-based greases
    • Better pressure absorption capacity due to special EP additives reduces wear
    • Good compatibility with FKM elastomers

    Versatile uses

    • Very wide service temperature grease – extraordinary for a lithium-based grease
    • High ageing and oxidation stability enable long component life
    • Optimised oil release reduces friction resistance and contributes to higher efficiency
    Characteristics  Klübersynth BEH 42-232
    Article number 004333
    Composition, thickener lithium complex soap
    Composition, type of oil ester oil , ether oil
    Colour space yellow
    Service temperature, lower limit -40 °C
    Service temperature, upper limit  180 °C
    Lubricating greases - K, DIN 51825@DIN 51502 KPE2R-40
    Density, Klüber method: PN 024, 20°C approx. 0.9 g/cm³
    NLGI grade, DIN 51818  2
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 22.5 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 230 mm²/s
    Copper corrosion, DIN 51811, 24 h, 150°C  1 - 150 - 24 corrosion degree
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
    Oil separation, ASTM D6184, based on standard, 30 h, 150°C ≤ 10 % by weight
    Flow pressure, DIN 51805-2, -40°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 250 °C
    Four-ball tester: wear characteristics, DIN 51350-5, E: 1000 N, 1 min, wear scar diameter ≤ 1.8 mm
    Speed factor (n x dm)  approx. 600000 mm/min
    Water resistance, DIN 51807-1, 3 h, 90°C  ≤ 1 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

     

    klubersynth-beh-42-232.pdf