Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

isoflex topas nca 52

Anasayfa > ürünler > kluber > isoflex topas nca 52
Kategoriler
  • ki̇myasallar ve solventler
    • ISOFLEX TOPAS NCA 52
    ISOFLEX TOPAS NCA 52

    isoflex topas nca 52

    ISOFLEX TOPAS NCA 52 is a synthetic long-term grease with good low-temperature properties. It has a good load-carrying capacity and ensures smooth running even at high speeds and accelerations. The thickener made of special calcium soap ensures good adhesion to the component and good resistance to media. The additives contained in ISOFLEX TOPAS NCA 52 increase wear protection.

    • ISOFLEX TOPAS NCA 52 is used for high-speed rolling and plain bearings as well as for small gears subject to high loads. Due to the good compatibility with plastics the grease is suitable for plasticplastic or metal-plastic material combinations. The low starting torque and the good wear protection make it an ideal grease for the long-term lubrication of linear motion guides and ball screws, e.g. in handling and automation technology. ISOFLEX TOPAS NCA 52 can also be used for many automobile applications, e.g. for the lifetime lubrication of seat rails. It is suitable for components which have to be lubricated prior to dip painting and the drying process at peak temperatures of 180 °C as the lubricant remains at the friction point and provides reliable lubrication even after short thermal treatment.
    • Reduced maintenance due to long-term or lifetime lubrication
    • Reliable operation and many years of practical experience
    • Wide application range even with high loads
    • Low starting and running torques particularly at low temperatures ensure high efficiency and energy savings
    • Longer component life due to good wear protection
    Characteristics ISOFLEX TOPAS NCA 52
    Article number 004179
    Composition, thickener calcium complex soap
    Composition, type of oil  synthetic hydrocarbon oil
    Colour space beige
    Service temperature, lower limit -50 °C
    Service temperature, upper limit  130 °C
    Density, Klüber method: PN 024, 20°C approx. 0.89 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 265 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 2800 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 5200 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 5.9 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 31 mm²/s
    Copper corrosion, DIN 51811, 24 h, 120°C 1 - 120 - 24 corrosion degree
    Flow pressure, DIN 51805-2, -40°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396  ≥ 220 °C
    Speed factor (n x dm) approx. 1000000 mm/min
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

     

    kluber-isoflex-topas-nca-52.pdf