ISOFLEX TOPAS NB 5051

ISOFLEX TOPAS NB 5051 is used for plain and rolling bearings (e.g. in automotive engineering) and for gas meters. It is also used in small gears, where it reduces the noise produced by the gear wheels.
ISOFLEX TOPAS NB 5051 is also suitable for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical actuators for valves).
Its good adhesion on smooth surfaces makes it ideal for the runningin lubrication (assembly) of plastic and composite bearings.

Characteristics	ISOFLEX TOPAS NB 5051
Composition, thickener	barium complex soap
Composition, type of oil	synthetic hydrocarbon oil
Colour space	beige
Texture	homogeneous , short fibrous
Service temperature, lower limit	-60 °C
Service temperature, upper limit	130 °C
Density, Klüber method: PN 024, 20°C	approx. 0.91 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	385 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	415 0.1 mm
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit	700 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit	1500 mPas
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 5.9 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 30 mm²/
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree
Flow pressure, DIN 51805-2, -60°C	≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396	≥ 170 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx	36 months

kluber-isoflex-topas-nb-5051.pdf

Adınız Soyadınız

Şirket Adı

E-Mail Adresiniz

Telefon Numaranız

Mesajınız

Kvkk ve Aydınlatma Metni'ni okudum anladım.