Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Adres:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telefon: +90 332 347 02 02

Sosyal Medya

Logo

isoflex topas ak 50

Anasayfa > ürünler > kluber > isoflex topas ak 50
Kategoriler
  • ki̇myasallar ve solventler
    • ISOFLEX TOPAS AK 50
    ISOFLEX TOPAS AK 50

    isoflex topas ak 50

    SOFLEX TOPAS AK 50 consists of synthetic hydrocarbon oil and aluminium complex soap. It protects against corrosion and is resistant to oxidation and ageing. In addition, it has good wetting properties and low internal lubricant friction.

    • ISOFLEX TOPAS AK 50 is suitable for the lubrication of plain and rolling bearings operating at high and/or low temperatures. It can also be used in small gears and plastic/steel as well as plastic/plastic components. It is compatible with many thermoplastics. 
    • The lubricant is applied by brush or conventional metering systems. Owing to the different compositions of elastomers and plastic materials, compatibility tests are indispensable before series application.
    • Lubricant for plastic components
    • High-speed grease
    • Good corrosion protection
    • Resistant to oxidation and ageing
    • Good surface wetting
    Characteristics ISOFLEX TOPAS AK 50
    Article number  004151
    Composition, thickener  aluminium complex soap
    Composition, type of oil  synthetic hydrocarbon oil
    Colour space  yellow
    Texture homogeneous , short fibrous
    Service temperature, lower limit -50 °C
    Service temperature, upper limit  120 °C
    Density, Klüber method: PN 024, 20°C approx. 0.87 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit  355 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 385 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 1200 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 1200 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C 2000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 5.9 mm²/s

    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C

    		 approx. 30 mm²/s
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h  ≤ 1 corrosion degree
    Dropping point, DIN ISO 2176 / IP 396 ≥ 200 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    kluber-isoflex-topas-ak-50.pdf