CENTOPLEX CX 4 375 AU

Being a grease of very low consistency CENTOPLEX CX 4/375 AU is suitable for small gears subject to high speeds, especially bevel gears in right angle grinders. At temperatures < 80°C long-term lubrication is possible.
CENTOPLEX CX 4/375 AU can be applied onto the tooth flanks by brush in order to allow minimum quantity lubrication. Lubrication is also possible by providing a grease sump in the gear. Due to the good oil separation, wetting of the lubrication points in gears or bearings is ensured. CENTOPLEX CX 4/375 AU can also be applied through central automatic lubrication systems.

Characteristics	CENTOPLEX CX 4/375 AU
Article number	020047
Composition, thickener	lithium soap
Composition, type of oil	mineral oil
Appearance	almost transparent
Colour space	brown
Texture	homogeneous
Service temperature, lower limit	-30 °C
Service temperature, upper limit	120 °C
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	355 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	385 0.1 mm
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	≤ 1 corrosion degree
Oil separation, DIN 51817 N, 168 h, 40°C	≤ 7 % by weight
Flow pressure, DIN 51805-2, -30°C	≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396	≥ 150 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months

kluber-centoplex-cx-4-375-au.pdf

Adınız Soyadınız

Şirket Adı

E-Mail Adresiniz

Telefon Numaranız

Mesajınız

Kvkk ve Aydınlatma Metni'ni okudum anladım.