CENTOPLEX 2 DL

CENTOPLEX 1 DL/2 DL can be used as low-temperature greases in rolling and plain bearings as well as lubrication points subject to low torques and/or high speeds. These greases have also proven effective for the lubrication of locks in vehicles, windshield wipers and small gears. CENTOPLEX 2 DL is also suitable for the lubrication of freewheels. When used for long-term lubrication, temperatures at the friction point should be < 70 °C. We would be pleased to provide more detailed information on relubrication intervals and quantities.

Characteristics	CENTOPLEX 1 DL	CENTOPLEX 2 DL
Service temperature, upper limit	80 °C	80 °C
Density, Klüber method: PN 024, 20°C	approx. 0.87 g/cm³	approx. 0.9 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	310 0.1 mm	265 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	340 0.1 mm	295 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 3 mm²/s	approx. 3 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 14 mm²/s	approx. 14 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h	0 corrosion degree	0 corrosion degree
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months	36 months

kluber-centoplex-2-dl.pdf

Adınız Soyadınız

Şirket Adı

E-Mail Adresiniz

Telefon Numaranız

Mesajınız

Kvkk ve Aydınlatma Metni'ni okudum anladım.