Logo

Buyonsell, 2000'li yıllardan bu yana sahip olduğu uzmanlık, deneyim ve engin bilgi birikimiyle, Türkiye'nin lider madeni ve motor yağ tedarikçilerinin başında gelmektedir.

İletişim Bilgileri

Sosyal Medya

centoplex 1 dl

CENTOPLEX 1 DL/2 DL are low-temperature greases based on an oxidation-resistant mineral oil and a lithium-calcium soap. Due to the good resistance to working under normal temperatures and loads these greases can be used for long-term lubrication.

Characteristics CENTOPLEX 1 DL CENTOPLEX 2 DL
Article number 020123 020007
Composition, thickener lithium-calcium soap  lithium-calcium soap 
Composition, type of oil mineral oil mineral oil
Colour space beige beige
Service temperature, lower limit -45 °C  -40 °C 
Service temperature, upper limit 80 °C 80 °C
Density, Klüber method: PN 024, 20°C approx. 0.87 g/cm³  approx. 0.9 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 310 0.1 mm 265 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 340 0.1 mm 295 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 3 mm²/s approx. 3 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 14 mm²/s  approx. 14 mm²/s 
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h  0 corrosion degree 0 corrosion degree
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months 36 months

 

  • Low-temperature greases
  • Dynamically light
  • Long-term lubrication of simple applications
  • Multi-purpose greases
  • Excellent corrosion protection
  • CENTOPLEX 1 DL/2 DL can be used as low-temperature greases in rolling and plain bearings as well as lubrication points subject to low torques and/or high speeds. These greases have also proven effective for the lubrication of locks in vehicles, windshield wipers and small gears. CENTOPLEX 2 DL is also suitable for the lubrication of freewheels. When used for long-term lubrication, temperatures at the friction point should be < 70 °C. We would be pleased to provide more detailed information on relubrication intervals and quantities.