Icarus

The polluted air is suctioned in thanks to the vacuum generated by a high-efficiency centrifugal fan placed over the filters. The fan is thus free from any possibility of damage as it only works with clean air, free of any residual pollutants.
The air initially passes through a special baffle that has the task of evenly distributing the suctioned air over the entire useful contact surface of the filters, thus ensuring proper utilisation of the filters.
The air then passes through a battery of filters with increasing efficiency until an efficiency of more than 95% is reached with pollutant particles even smaller than one micron, which can be raised to 99.95% with the use of an absolute post-filter (HEPA FILTER) in accordance with EN 1822.
SEQUENCE OF THE SUPPLIED FILTERS: The arrangement of the Icarus internal filters is designed to provide increasing filtration efficiency. The filters are easily accessible by removing the tightening screws and opening the side door, allowing for simple, fast and clean maintenance.
METALLIC G2
65-80% efficiency in accordance with standard UNI EN 779.
SYNTHETIC G3
80-90% efficiency in accordance with standard UNI EN 779.
SYNTHETIC F7
85% efficiency.
SYNTHETIC F9
95% efficiency (*also available with H13 upon request).

ENERGY EFFICIENCY
The use of high-efficiency centrifugal fans enables high performance in terms of flow rate and pressure, with considerably reduced installed power and limited energy consumption. Icarus is also remarkably quiet.
PRESSURE GAUGE
Icarus is equipped as standard with a precise instrument to read the clogging status of the internal filters.
FAST AND EASY MAINTENANCE
Access to the filter section is truly simple and straightforward, with no need to unscrew or dismantle anything. Simply open the door closed with two locks for easy access to the filters, which can be removed very easily and replaced quickly.

* Free inlet

Adınız Soyadınız

Şirket Adı

E-Mail Adresiniz

Telefon Numaranız

Mesajınız

Kvkk ve Aydınlatma Metni'ni okudum anladım.