Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Social Media

traxium axle 7 80w-90

Transmission Oil

Approved Technology

Technology you can trust

You will ensure maximum performance in your vehicle with transmission oils tested and approved by vehicle manufacturers. Our products are developed exclusively at our R&D center in France in close cooperation with vehicle and equipment manufacturers. Thanks to this cooperation, we fulfill the most specific technical requirements that enable our products to be approved by vehicle manufacturers.

Recommendations for Use

Before using the product, the vehicle maintenance manual should be checked and the correct oil change should be made in accordance with the manufacturer's recommendations. The product should not be stored at ambient temperatures above 60°C. Additionally, it should not be stored in places exposed to sunlight, extreme cold or sudden changes in ambient temperature. Packaging should not be stored outdoors. If stored outdoors, the barrels should be kept horizontally to prevent situations such as water contamination and tearing of product labels.

Health, Safety and Environment

Based on the available toxicological information, the product does not have any adverse health effects if used in accordance with the recommendations in the Safety Data Sheet and the stated intended use. The product should not be used for any purpose other than the specified areas of use. When disposing of the product after use, please comply with the relevant legislation of the Republic of Turkey and protect the environment.

  • TRAXIUM AXLE 7 80W-90 is suitable for gears operating under heavy loads that meet API GL-5 requirements.
  • TRAXIUM AXLE 7 80W-90 has been specially developed for ZF and MAN hypoid gears.
  • Effective protection against wear and corrosion in gears thanks to improved extreme pressure properties.
  • High compatibility with oil filters with its antifoam feature.
  • Sustainable performance thanks to high viscosity index.
TEST BİRİM METOT DEĞER
Yoğunluk @ 15 °C kg/m3 DIN 51757 D 897
Kinematik Viskozite @ 40°C mm²/s ASTM D445 140
Kinematik Viskozite @ 100°C mm²/s ASTM D445  15
Viscosite İndeksi  - ASTM D2270  105
Parlama Noktası °C ASTM D92 208
Akma Noktası °C ASTM D97 -27

*Verilen tipik özellikler ortalama değerleri temsil etmektedir.