Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

drosera ms 32

Homepage > products > total energies > drosera ms 32
Categories
  • chemicals and solvents
    • DROSERA MS 32

    drosera ms 32

    High-performance, multifunctional, zinc-free oil for machine tools.

    • Excellent extreme pressure properties.
    • Excellent non-stick gliding properties.
    • Strong non-stick feature from 68 to 220 degrees.
    • Very low coefficient of friction.
    • Resistance to oil mist.
    • Very good oxidation resistance.
    • Very good protection against rust.
    • Very good anti-wear properties.
    • Very good resistance to foaming.
    • Good filterability.
    Karakteristikler Metod Birim DROSERA MS
    2 5 10 15 22 32 46 68 100 150 220 320 460
    Özgül Ağırlık ISO 3675 kg/m3 824 818 841  843 864 870 880 885 886 890 900 900 905
    Viskozite @ 40°C ISO 3104 mm2/s 2 5 10 15 22 32 46 68 100 150 220 320 460
    Viskozite İndeksi ISO 2909  -  -  - 85 100 100 104 104 103 100 99 99 98 95
    Parlama Noktası ISO 2592 °C 82 150 160 190 210 210 230 240 250 260 260 260 260
    Akma Noktası ISO 3016 °C -60 -30 -36 -27 -27 -21 -18 -15  -15 -15 -12 -9 -6
    Anilin Noktası ISO 2977 °C 69 93 95 96 97 100 102 103 109 110 110 110 110

    *Verilen tipik özellikler ortalama değerleri temsil etmektedir. 

    total-energies-drosera-ms-32.pdf
    • Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors.
    • They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors.
    • Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected.
    • Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year.
    • Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors.
    • Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency
    • When selecting the oil viscosity for air compressors please observe the manufacturers’ instructions.
    • When switching a used compressor to Klüber Summit PS oils, drain the old oil from the whole circuit while still warm. We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit PS oil.
    • When switching from mineral oil to a Klüber Summit PS oil please consider that the compressor may contain oxidation residues in the form of blackened or contaminated oil. As such residues can affect the service life of the fresh Klüber Summit PS oil, the compressor should be cleaned using the Klüber Summit Varnasolv conditioner.
    • For further information, please consult the Klüber Summit Varnasolv product information leaflet or contact Klüber Lubrication.
    • After switching to a Klüber Summit PS oil we recommend determining the oil change interval through an oil analysis.