Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

vivaldi m 220

Homepage > products > q8 oils > vivaldi m 220
Categories
  • chemicals and solvents
    • VIVALDI M 220

    vivaldi m 220

    Q8 Vivaldi M 220 is an exceptional heavy duty circulating oil specially designed for no-twist rod mills. This superior circulating oil fully meets the requirements of Morgoil no-twist rod mills and Danielli rod mills. Q8 Vivaldi M 220 offers extreme demulsibility and is the perfect product for circulating lubrication in gears and bearings.

    • Q8 Vivaldi M 220 is used in no-twist rod mills, hydraulic applications that require a high viscosity oil, marine and industrial gearboxes and general equipment. It is highly recommended for plain and rolling bearings. Q8 Vivaldi M 220 is suited for valves and pumps and for moderate duty spur, bevel and helical gear units.
    • Minimizes downtime which leads to a higher maintenance efficiency
    • Extensive oil drain interval for a longer lubricant lifetime
    • Superior separation of water
    • Excellent air release
    • Extreme protection against corrosion
    • Outstanding oxidation stability
    • Low residue forming
    • Outstanding foam stability
    q8-vivaldi-m-220.pdf
    Properties Method Unit Typical
    ISO Viscosity Grade  -  - 220
    Density, 15 °C D 4052 g/ml 0,891
    Colour D 1500  - L 2.5
    Kinematic Viscosity, 40 °C D 445 mm²/s 220
    Kinematic Viscosity, 100 °C D 445 mm²/s 19.0
    Viscosity Index D 2270  - 97
    Pour Point D 97 °C -12
    Flash Point, COC D 92 °C 270
    Emulsion, Distilled Water, 82.2 °C D 1401  - 40-40-0(10)
    Foam, 5 min blowing, seq. 1-2-3 D 892 ml 10/20/10
    Foam, 10 min settling, seq. 1-2-3 D 892 ml 0/0/0
    Rust Test, Proc. A and B, 24 h D 665  - pass
    Copper Strip, 3 h, 100 °C D 130  - 1
    FZG Test, A/8.3/90 DIN 51354 load stage >12

    *The figures above are not a specification. They are typical figures obtained within production tolerances.