Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

verdi 32

Homepage > products > q8 oils > verdi 32
Categories
  • chemicals and solvents
    • VERDI 32

    verdi 32

    Q8 Verdi 32 is an advanced multi-purpose circulating oil with a long service life. It has a high chemical and thermal stability and protects against rust and corrosion. Q8 Verdi 32 has optimum lubricating characteristics and water resistant properties.

    • Q8 Verdi 32 is used in hydro turbines, pumps, valves and other applications that require a long service life. It is applied in a variety of industrial systems that don’t need anti-wear performance. Q8 Verdi 32 is highly recommended for plain and rolling bearings, vacuum pumps, hydraulic pumps and air compressor applications.
    • Extensive lubricant applications so limited products needed
    • Extends service life time thus minimal costs and maximal efficiency
    • Highly suitable for a wide range of application
    • Outstanding oxidation stability
    • Optimum anti-corrosion characteristics
    • Optimum separation of water
    Properties Method Unit Typical
    ISO Viscosity Grade  -  - 32
    Density, 15 °C D 4052 g/ml 0,87
    Kinematic Viscosity, 40 °C D 445 mm²/s 32.0
    Kinematic Viscosity, 100 °C D 445 mm²/s 5.33
    Viscosity Index D 2270  - 98
    Total Acid Number D 974 mg KOH/g 0.12
    Pour Point D 97 °C -30
    Flash Point, COC D 92 °C 208
    Colour D 1500  - L 1.0
    Air Release, 50 °C D 3427 min 4
    Emulsion, Distilled Water, 82.2 °C D 1401  - 40-40-0(5)
    Foam, 5 min blowing, seq. 1-2-3 D 892 ml 10/20/10
    Foam, 10 min settling, seq. 1-2-3 D 892 ml 0/0/0
    Rust Test, Proc. A and B, 24 h D 665  - pass
    Copper Strip, 3 h, 100 °C D 130  - 1

    *The figures above are not a specification. They are typical figures obtained within production tolerances.

    q8-verdi-32.pdf