FORGING BIO W 1007

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com

Telephone: +90 332 347 02 02

Social Media

FORGING BIO W 1007

FORGING BIO W 1007

forging bio w 1007

Forging Bio 1007 W is a synthetic lubricant, has a graphite and mineral oil-free formulation and is miscible with water. These features are designed to provide a cleaner working environment. Moreover, it can be effectively used in forging various materials such as steel and aluminum. Forging Bio 1007 W shows strong adhesion when applied to forging dies and forms a homogeneous lubricant film layer. This layer reduces the contact between the forging die surfaces and the parts and allows the part to be easily separated from the mold. As a result, it provides an effect that extends mold life. Forging Bio 1007 W is a solution typically used in forging medium-duty parts. This solution can be applied to the mold surface by brush or spraying. Additionally, it performs effectively at mold temperatures between 130-400 °C.

Recommended usage concentration: 5-15%
Refractometer coefficient: 2.1
When preparing the Forging Bio 1007 W solution, the coolant should always be added slowly to the water and mixed until a homogeneous solution is obtained.
Required values of the water to be used in preparing the Forging Bio 1007 W solution;
Hardness: 5-20 °dH
Conductivity: <1000 μS/cm
Chloride Amount (CI): <50 mg/lt
In order to prevent foam formation in solutions prepared using deionized water, it is recommended to add hard water to increase the hardness of the water to a minimum of 5°dH. When the temperature of the water used drops below 10°C, mixing of the liquid will become difficult.

Clean formulation providing an environmentally friendly working environment.
Structure containing completely synthetic components.
High level of biological stability.
Formula free of graphite and mineral oil.
Capacity to achieve quality surface results.
Exceptional corrosion protection properties.

Özellik	Test Metodu	Tipik Değerler
Görünüş	Görsel	Açık Sarı, Bulanık
Yoğunluk, 15°C g/cm3	ASTM D 1298	~1,200
Viskozite, 20°C mm2/s	ASTM D 445	~130
pH Değeri, Konsantre	DIN 51369	~9,5

molytch-forging-bio-w-1007_tds.pdf

Name and Surname

Company Name

Your E-Mail Address

Your Telephone Number

Your Message

I have read and understood the Kvkk and Information Text.