PARALIQ GTE 703

PARALIQ GTE 703 is a special grease suitable for beer taps, barrel filling installations and valves.
It can be used for the lubrication of seals in the beverage industry whenever a H1 lubricating grease compatible with EPDM and complying with FDA is required. Additionally, PARALIQ GTE 703 can be used for rolling bearings subject to low loads.
PARALIQ GTE 703 can be applied by spatula, grease gun or directly from the tube.
The lubrication technique for highly viscous lubricants should be chosen with great care: in the system used the intake of air should be avoided since otherwise the high pressures lead to oxidation and consequently decomposition of the product.
For this reason we recommend pumping the product with the lowest pressure possible. It may make sense to contact the manufacturer of the application equipment used.
As a general rule, users should make sure to use only new highpressure pumping lines in their lubrication equipment.
As a precaution against grease leaking from lines we recommend wearing suitable protection gear. (e.g. protective goggles).
PARALIQ GTE 703 is neutral towards most metals, thermoplastics and elastomers. Owing to the many different elastomer and plastic compositions their compatibility should be checked prior to series applications.

A reduction in your lubricant inventory with one lubricant which can be considered for both seals and rolling bearings
Good compatibility when coming in contact with EPDM seals or even beer foam enhancing seal life and reduction in down time
High resistance to many types of media such as disinfectants, cleaning agents, water, steam ensuring maximum protection of both
seals and bearings, enhancing life and operating cost reduction
NSF H1 registered supporting process reliability
NSF ISO 21469 certified - supports compliance with the hygienic requirements in your production plant.

Characteristics	PARALIQ GTE 703
Article number	022148
Colour space	white
Texture	homogeneous
Service temperature, lower limit	-50 °C
Service temperature, upper limit	150 °C
NSF H1 registration number	056372
Density, Klüber method: PN 024, 20°C	approx. 1.31 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	220 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	250 0.1 mm
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months

kluber-paraliq-gte-703.pdf kluber-paraliq-gte-703-en.pdf

Name and Surname

Company Name

Your E-Mail Address

Your Telephone Number

Your Message

I have read and understood the Kvkk and Information Text.