Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

paraliq ga 343

Homepage > products > kluber > paraliq ga 343
Categories
  • chemicals and solvents
    • PARALIQ GA 343
    PARALIQ GA 343

    paraliq ga 343

    Multi-purpose grease for food-processing and pharmaceutical industries.

    PARALIQ GA 343 is a lubricating grease based on paraffinic mineral oil and an aluminium complex soap. PARALIQ GA 343 is resistant to cold and hot water. PARALIQ GA 343 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the foodprocessing, cosmetics, pharmaceutical or animal feed industries. The use of PARALIQ GA 343 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

    • PARALIQ GA 343 is used for many different types of machines and installations in the food-processing and pharmaceutical industries where incidental contact with the food product cannot be excluded.
    • Applications include the lubrication of rolling and plain bearings, lifting cylinders, joints, guide bars, guide rails, cam discs, seals etc. 
    • Before applying PARALIQ GA 343, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions exist, mandatory for food-safe H1 lubrication.
    • If the production process does not allow cleaning, we recommend the existing grease be replaced by purging the system during relubrication.
    • The grease is applied by spatula, brush, grease gun or similar techniques. Avoid excessive lubrication. The friction points can be cleaned by means of standard cleaning agents.
    • Multi-purpose grease for various lubrication points
    • Less lubricant lost due to good water resistance
    • Better component protection due to good anticorrosive behaviour, good adhesion due to high consistency
    • NSF H1-registered for higher process reliability and compliant with halal and kosher requirements
    • ISO 21469 certified – supports the compliance with the hygienic requirements in your production. 
    Characteristics  PARALIQ GA 343
    Article number  096017
    Composition, thickener aluminium complex soap
    Composition, type of oil paraffinic mineral oil
    Colour space yellow
    Texture homogeneous
    Service temperature, lower limit 20 °C
    Service temperature, upper limit 110 °C
    NSF H1 registration number 136873
    Density, Klüber method: PN 024, 20°C approx 0.903 g/cm³
    NLGI grade, DIN 51818 2
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 265 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 4000 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 8000 mPas
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
    Flow pressure, DIN 51805-2, -20°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 220 °C
    Water resistance, DIN 51807-1, 3 h, 90°C ≤ 1 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    kluber-paraliq-ga-343.pdfkluber-paraliq-ga-343-en.pdf
    kluber-paraliq-ga-343.pdfkluber-paraliq-ga-343-en.pdf