Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubersynth uh1 64-1302

Homepage > products > kluber > klubersynth uh1 64-1302
Categories
  • chemicals and solvents
    • KLUBERSYNTH UH1 64-1302
    KLUBERSYNTH UH1 64-1302

    klubersynth uh1 64-1302

    Klübersynth UH1 64-1302 was specifically developed for greaselubricated roller chains operating under high loads in the mixed friction regime in continuous flow sterilizers. Klübersynth UH1 64- 1302 thus offers excellent wear protection even under extreme lubricating conditions.

    Being highly resistant to water and steam, this adhesive lubricating grease is particularly suitable for applications in a saturated steam atmosphere at normal sterilisation temperatures.

    Klübersynth UH1 64-1302 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 64-1302 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

    • Good adhesiveness, excellent protection against wear and strong resistance to steam and water make Klübersynth UH1 64-1302 ideal for the following applications: high-load low-speed rolling and plain bearings, joints, toothed racks, tubular tracks, cams, stuffing boxes, high-load and grease-lubricated chains, etc.
    • Klübersynth UH1 64-1302 is applied by brush, spatula, grease gun, or centralised lubrication systems designed for NLGI 3 greases.

    Higher component availability and longer maintenance intervals

    • due to good wear protection
    • due to good stability also at high temperatures
    • due to good resistance to water and steam

    Certified acc. to ISO 21469 - supports the compliance with the hygienic requirements in your production. 

    Characteristics Klübersynth UH1 64-1302
    Article number 096049
    Composition, thickener silicate
    Composition, type of oil synthetic hydrocarbon oil
    Colour space beige
    Texture -10 °C
    Service temperature, upper limit 140 °C
    NSF H1 registration number 136697
    Density, Klüber method: PN 024, 20°C approx. 0.99 g/cm³
    NLGI grade, DIN 51818 2
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 265 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 15000 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 22000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 100 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 1300 mm²/s
    Four-ball tester, welding load, DIN 51350-4 ≥ 2800 N
    Water resistance, DIN 51807-1, 3 h, 90°C ≤ 1 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    klubersynth-uh1-64-1302.pdf