Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubersynth uh1 14-222

Homepage > products > kluber > klubersynth uh1 14-222
Categories
  • chemicals and solvents
    • KLUBERSYNTH UH1 14-222
    KLUBERSYNTH UH1 14-222
    KLUBERSYNTH UH1 14-222

    klubersynth uh1 14-222

    Synthetic lubricating grease for universal application in the food-processing and pharmaceutical industries.

    Klübersynth UH1 14-222 was developed for the special requirements of the food-processing and pharmaceutical.
    Klübersynth UH1 14-222 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 14-222 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

    • Klübersynth UH1 14-222 is suitable for use in machines, installations and equipment of the food-processing and pharmaceutical industries, particularly for lubrication points that may have incidental and technically unavoidable contact with the food product.
    • This food-grade lubricant is intended for the universal lubrication of rolling and plain bearings, lifting cylinders, joints, guide rods and rails, cams, etc.
    • Klübersynth UH1 14-222 is applied by brush, spatula, grease gun or grease cartridge.
    • Before applying Klübersynth UH1 14-222, the lubrication points should be thoroughly cleaned so as to ensure maximum hygiene, which is mandatory for H1 lubrication.
    • If the production process does not allow the machines and components to be cleaned, the grease can be replaced by relubrication. In this case, perfect H1 lubrication is only achieved after a certain time.
    • In all questions regarding the miscibility of greases, our Technical Consulting and Sales Department will be pleased to offer advice.
    • Facilitates product streamlining owing to its wide range of applications
    • Offers improved surface protection through good adhesion and its particular consistency
    • ISO 21469 certified – supports the compliance with the hygienic requirements in your production.
    Characteristics Klübersynth UH1 14-222
    Article number 096071
    Colour space beige
    Texture homogeneous
    Service temperature, lower limit -25 °C
    Service temperature, upper limit 120 °C
    NSF H1 registration number 128827
    Density, Klüber method: PN 024, 20°C approx. 0.94 g/cm³
    NLGI grade, DIN 51818 2
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 265 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 6000 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 12000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 29 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 260 mm²/s
    Low temperature torque, IP 186, -25°C, running torque ≤ 100 mNm
    Low temperature torque, IP 186, -25°C, starting torque ≤ 1000 mNm
    Dropping point, DIN ISO 2176 / IP 396  ≥ 220 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx 24 months

     

    klubersynth-uh1-14-222.pdfklubersynth-uh1-14-222-en.pdf
    klubersynth-uh1-14-222.pdfklubersynth-uh1-14-222-en.pdf