Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubersynth uh1 14-1600

Homepage > products > kluber > klubersynth uh1 14-1600
Categories
  • chemicals and solvents
    • KLUBERSYNTH UH1 14-1600
    KLUBERSYNTH UH1 14-1600

    klubersynth uh1 14-1600

    Synthetic lubricating grease for the food and pharmaceutical processing industry.

    Klübersynth UH1 14-1600 is a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. Klübersynth UH1 14-1600, an NSF H1- registered lubricant, is a contributor towards the supporting of food safety. The use of this lubricant needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear.

    • Klübersynth UH1 14-1600 has been especially designed for applications in machines and installations used in the food processing and pharmaceutical industries where contact with the food product is technically unavoidable. It is intended for use as a fluid gear grease for the immersion lubrication of toothed gears, worm gears and chains operating more smoothly with a softer grease.
    • Klübersynth UH1 14-1600 is applied by brush, spatula, grease gun or via central lubrication systems. Before substituting Klübersynth UH1 14-1600 for other greases, thoroughly clean all lubrication/friction points. If the greases are miscible, relubrication is sufficient. In gears, however, used grease should be removed as far as possible.
    • The product can normally be applied by means of centralised lubricating systems. Please note, however, that due to different system configurations and application conditions the pumpability of the product has to be confirmed with the system manufacturer for each individual application. We will be pleased to provide assistance in this matter.
    • A special feature of this product is the very fast increase of worked penetration. It quickly becomes very soft (approx. 6 months) thus falling beyond the indicated worked penetration range.
    • Improved pumpability due to its soft consistency
    • Component life enhanced resulting from a special thickener with good adhesion and good corrosion protection
    • ISO 21469 certified – supports the compliance with the hygienic requirements in your production
    Characteristics Klübersynth UH1 14-1600
    Article number 096038
    Composition, thickener aluminium complex soap
    Composition, type of oil synthetic hydrocarbon oil
    Colour space yellow
    Texture fibrous , homogeneous
    Service temperature, lower limit -45 °C
    Service temperature, upper limit 120 °C
    NSF H1 registration number 136695
    Density, Klüber method: PN 024, 20°C approx. 0.85 g/cm³
    NLGI grade, DIN 51818 0/00
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit  370 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 430 0.1 mm
    Dropping point, DIN ISO 2176 / IP 396 ≥ 200 °C
    FZG scuffing test, DIN ISO 14635-3, based on standard, A / 2.8 / 50, failure load stage 11
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 12 months

     

    klubersynth-uh1-14-1600.pdfklubersynth-uh1-14-1600-en.pdf
    klubersynth-uh1-14-1600.pdfklubersynth-uh1-14-1600-en.pdf