Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubersynth uh1 14-151

Homepage > products > kluber > klubersynth uh1 14-151
Categories
  • chemicals and solvents
    • KLUBERSYNTH UH1 14-151
    KLUBERSYNTH UH1 14-151

    klubersynth uh1 14-151

    Synthetic lubricating grease for the food and pharmaceutical processing industry.

    Klübersynth UH1 14-151 was especially developed for the food processing and pharmaceutical industry. Klübersynth UH1 14-151 shows good anti-wear properties, water resistance and corrosion protection as well as a high ageing and oxidation stability.

    Klübersynth UH1 14-151 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 14-151 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

    • Used for machines and equipment in the food processing and pharmaceutical industry, particularly for lubrication points that may have incidental and technically unavoidable contact with the food product. However, we recommend using Klübersynth UH1 14-151 at all lubrication points, in order to avoid problems due to lubricant contamination.
    • This special grease lubricates rolling and sliding bearings, lifting cylinders, joints, guide bars, cams, etc.
    • Klübersynth UH1 14-151 is applied by brush, spatula, grease gun and grease cartridge or by means of centralized lubrication systems. Before substituting other greases with Klübersynth UH1 14-151 the bearings have to be cleaned and greased. If the greases are miscible, the grease can be exchanged by means of re-lubrication.
    • Good corrosion protection reduces the risk of premature bearing failure
    • Good pumpability in centralized grease system prevents grease starvation
    • For a wide service temperature range due to the soft consistency of the grease
    • ISO 21469 certified – supports the compliance with the hygienic requirements in your production
    Characteristics Klübersynth UH1 14-151
    Article number  096037
    Composition, thickener aluminium complex soap
    Composition, type of oil ester oil , synthetic hydrocarbon oil
    Colour space beige
    Texture homogeneous
    Service temperature, lower limit -45 °C
    Service temperature, upper limit 120 °C
    NSF H1 registration number 056354
    Density, Klüber method: PN 024, 20°C approx. 0.89 g/cm³
    NLGI grade, DIN 51818 1
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 310 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 340 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 22 mm²/
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 150 mm²/s
    Flow pressure, DIN 51805-2, -45°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 250 °C
    Speed factor (n x dm) approx. 500000 mm/min
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    klubersynth-uh1-14-1511.pdfklubersynth-uh1-14-151-en.pdf
    klubersynth-uh1-14-1511.pdfklubersynth-uh1-14-151-en.pdf