Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

kluberoil 4 uh1 n

Homepage > products > kluber > kluberoil 4 uh1 n
Categories
  • chemicals and solvents
    • KLUBEROIL 4 UH1 N
    KLUBEROIL 4 UH1 N
    KLUBEROIL 4 UH1 N

    kluberoil 4 uh1 n

    Synthetic gear and multi-purpose oils for the food-processing and pharmaceutical industries

    Klüberoil 4 UH1 N is a synthetic high-performance gear and  multipurpose oil based on polyalphaolefin satisfying the growing requirements and increasing power density of modern gears.

    Klüberoil 4 UH1 N is based on high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.

    Klüberoil 4 UH1 N is registered as NSF H1 for use in the foodprocessing and pharmaceutical industries and complies with FDA 21 CFR Sec 178.3570. It was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberoil 4 UH1 N can contribute to increase reliability of your production processes. Nevertheless it is recommended to conduct an additional risk analysis, e.g. HACCP.

    Klüberoil 4 UH1 N is certified according to ISO 21469, thus supporting compliance with hygienic requirements of your production.  Klüberoil 4 UH1 N from ISO VG 68 to 680 clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klüberoil 4 UH1 N without prior consultation provided the general application notes are observed.

    Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The good wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs.

    Klüberoil 4 UH1 N offers a much longer service life than mineral and white oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. In certain applications, even lifetime lubrication is possible. The product's low foaming tendency and anticorrosive properties enable problem-fr_FRee gear operation. Oil leakage leading to contamination is prevented due to the good compatibility with elastomers.

    The good viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications.

    The optimised friction behaviour enabled by the carefully selected base oils reduces power loss and improves gear efficiency. Klüberoil 4 UH1 N is approved by SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, Sumitomo, Bonfiglioli, Brevini, STM, Watt Drive, etc.

    By using Klüberoil 4 UH1 N you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.

    • Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.
    • Klüberoil 4 UH1 N can be used for immersion, immersion circulation and injection lubrication. The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible.
    • When using automatic lubricating systems, please note the manufacturer's instructions regarding the maximum permissible viscosity. The low-viscosity varieties are also used for oil mist lubrication.
    • Klüberoil 4 UH1 N is miscible with mineral oils and synthetic hydrocarbons. Prior to switchover, lubrication points should be cleaned, or gears or enclosed systems be flushed with the Klüberoil 4 UH1 N oil to be used. In view of the H1 requirements in the foodprocessing industry, any mixture with non-H1 lubricants during conversion has to be prevented.
    • For use at permanent temperatures of 80 °C max., seals made of NBR may be used. For higher temperatures, seals made of FKM should be chosen. It should be noted that elastomers from one or several manufacturers can behave differently; therefore tests should be performed.
    • For checking the contact pattern during running-in, the inspection paint Klübertop P 39-462 Spray (Art. No. 081295) can be used.
    • Registered as NSF H1 and certified according to ISO 21469
    • High scuffing protection
    • Good wear protection for gears and rolling bearings
    • Good shear stability for reliable lubricant film formation
    • Excellent ageing and oxidation resistance
    • Wide service temperature range due to good viscosity-temperature behaviour
    • Low foaming tendency
    • Energy savings due to optimised friction behaviour
    • Good elastomer compatibility
    • Approved by numerous gear OEMs
    Characteristics Klüberoil 4 UH1-32 N Klüberoil 4 UH1-46 N Klüberoil 4 UH1-68 N Klüberoil 4 UH1-100 N
    Article number 029037 029038 029039 029040
    Service temperature, upper limit  120 °C  120 °C  120 °C  120 °C 
    NSF H1 registration number 121152 121175 121174 121173
    Density, DIN 51757, 15°C approx.  844 kg/m³ approx. 847 kg/m³ approx. 851 kg/m³ approx. 855 kg/m³
    Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 200 °C ≥ 200 °C ≥ 200 °C ≥ 200 °C
    Foam test, ISO 6247 / ASTM D892, 24°C, sequence I ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml
    Foam test, ISO 6247 / ASTM D892, 24°C, sequence III ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml
    Foam test, ISO 6247 / ASTM D892, 93.5°C, sequence II ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml
    ISO viscosity grade, DIN ISO 3448, ISO VG 32 46 68 100
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx.6 mm²/s approx.8 mm²/s approx. 11 mm²/s approx. 14 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx.32 mm²/s approx.46 mm²/s approx.68 mm²/s approx. 100 mm²/s
    Viscosity index, DIN ISO 2909 ≥ 135 ≥ 135 ≥ 140 ≥ 140
    Copper corrosion, DIN EN ISO 2160, 24 h, 100°C 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree
    Steel corrosion, DIN ISO 7120 / ASTM D665, method A, 24 h, 60°C rust-free rust-free rust-free rust-free
    Pour point, DIN ISO 3016 ≤ -39 °C ≤ -39 °C ≤ -36 °C ≤ -36 °C
    Ageing behaviour, DIN EN ISO 4263-4 / ASTM D2893, 312 h, 95°C, increase in viscosity at 100°C ≤ 6 % ≤ 6 % ≤ 6 % ≤ 6 %
    FAG FE8 rolling bearing test, DIN 51819-3, D-7.5 / 80-80, wear of cage ≤ 200 mg ≤ 200 mg ≤ 200 mg ≤ 200 mg
    FAG FE8 rolling bearing test, DIN 51819-3, D-7.5 / 80-80, wear of rolling elements ≤ 30 mg ≤ 30 mg ≤ 30 mg ≤ 30 mg
    FZG scuffing test, DIN ISO 14635-1, A / 8.3 / 90, failure load stage ≥ 12 ≥ 12 ≥ 12 ≥ 12
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months 36 months 36 months

     

    Characteristics Klüberoil 4 UH1-150 N Klüberoil 4 UH1-220 N Klüberoil 4 UH1-320 N Klüberoil 4 UH1-460 N
    Article number 029041 029042 029034 029043
    Service temperature, upper limit  120 °C  120 °C  120 °C  120 °C 
    NSF H1 registration number 121172 121171  122841 121170
    Density, DIN 51757, 15°C approx.858 kg/m³ approx.861 kg/m³ approx.862 kg/m³ approx.862 kg/m³
    Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 200 °C ≥ 200 °C ≥ 200 °C ≥ 200 °C
    Foam test, ISO 6247 / ASTM D892, 24°C, sequence I ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml
    Foam test, ISO 6247 / ASTM D892, 24°C, sequence III ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml
    Foam test, ISO 6247 / ASTM D892, 93.5°C, sequence II ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml
    ISO viscosity grade, DIN ISO 3448, ISO VG 150 220 320 460
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 19 mm²/s approx.26 mm²/s approx.35 mm²/s approx.47 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx.150 mm²/s approx.220 mm²/s approx.320 mm²/s approx.460 mm²/s
    Viscosity index, DIN ISO 2909 ≥ 140 ≥ 140 ≥ 140 ≥ 140
    Copper corrosion, DIN EN ISO 2160, 24 h, 100°C 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree
    Steel corrosion, DIN ISO 7120 / ASTM D665, method A, 24 h, 60°C rust-free rust-free rust-free rust-free
    Pour point, DIN ISO 3016 ≤ -36 °C ≤ -30 °C ≤ -30 °C ≤ -30 °C
    Ageing behaviour, DIN EN ISO 4263-4 / ASTM D2893, 312 h, 95°C, increase in viscosity at 100°C ≤ 6 % ≤ 6 % ≤ 6 % ≤ 6 %
    FAG FE8 rolling bearing test, DIN 51819-3, D-7.5 / 80-80, wear of cage ≤ 200 mg ≤ 200 mg ≤ 200 mg ≤ 200 mg
    FAG FE8 rolling bearing test, DIN 51819-3, D-7.5 / 80-80, wear of rolling elements ≤ 30 mg ≤ 30 mg ≤ 30 mg ≤ 30 mg
    FZG scuffing test, DIN ISO 14635-1, A / 8.3 / 90, failure load stage ≥ 12 ≥ 12 ≥ 12 ≥ 12
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months 36 months 36 months

     

    Characteristics Klüberoil 4 UH1-680 N Klüberoil 4 UH1-1500 N
    Article number 029044 029045
    Service temperature, upper limit  120 °C  120 °C 
    NSF H1 registration number 121169 122842
    Density, DIN 51757, 15°C 863 kg/m³ approx.866 kg/m³
    Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 200 °C ≥ 200 °C
    Foam test, ISO 6247 / ASTM D892, 24°C, sequence I ≤ 100/10 ml  
    Foam test, ISO 6247 / ASTM D892, 24°C, sequence III ≤ 100/10 ml  
    Foam test, ISO 6247 / ASTM D892, 93.5°C, sequence II ≤ 100/10 ml  
    ISO viscosity grade, DIN ISO 3448, ISO VG 680 1500
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx.65 mm²/s approx.26 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx.680 mm²/s approx.1500 mm²/s
    Viscosity index, DIN ISO 2909 ≥ 150 ≥ 180
    Copper corrosion, DIN EN ISO 2160, 24 h, 100°C 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree
    Steel corrosion, DIN ISO 7120 / ASTM D665, method A, 24 h, 60°C rust-free rust-free
    Pour point, DIN ISO 3016 ≤ -27 °C ≤ -25 °C
    Ageing behaviour, DIN EN ISO 4263-4 / ASTM D2893, 312 h, 95°C, increase in viscosity at 100°C ≤ 6 % ≤ 6 %
    FAG FE8 rolling bearing test, DIN 51819-3, D-7.5 / 80-80, wear of cage ≤ 200 mg ≤ 200 mg
    FAG FE8 rolling bearing test, DIN 51819-3, D-7.5 / 80-80, wear of rolling elements ≤ 30 mg ≤ 30 mg
    FZG scuffing test, DIN ISO 14635-1, A / 8.3 / 90, failure load stage ≥ 12 ≥ 12
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months
    kluberoil-4-uh1-n.pdfkluberoil-4-uh1-n-en.pdf
    kluberoil-4-uh1-n.pdfkluberoil-4-uh1-n-en.pdf