Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

kluberoil 4 uh1-15

Homepage > products > kluber > kluberoil 4 uh1-15
Categories
  • chemicals and solvents
    • KLUBEROIL 4 UH1-15

    kluberoil 4 uh1-15

    Low viscosity lubricating oil for the food and pharmaceutical industries.

    Klüberoil 4 UH 1-15 is a lubricating oil based on synthetic hydrocarbons for the food-processing and pharmaceutical industries.

    This synthetic lubricating oil is suitable for low temperatures and protects against corrosion.

    Klüberoil 4 UH 1-15 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberoil 4 UH 1-15 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

    • Klüberoil 4 UH 1-15 is used in the food-processing and pharmaceutical industries for all friction points where incidental contact with the food product cannot be excluded. Klüberoil 4 UH 1- 15 can be used as barrier medium in mechanical seals. It is also suitable for the lubrication of spindles, joints and chains subject to low loads, also at low temperatures. Klüberoil 4 UH1-15 Spray protects special steel components.
    • Klüberoil 4 UH 1-15 has also proven effective as H1 lubricating oil in Npneumatic maintenance units.
    • Klüberoil 4 UH 1-15 is miscible with mineral oil and synthetic hydrocarbons, however we recommend not mixing it with conventional lubricants in order to retain its NSF H1 status.
    • For the Klüberoil 4 UH1-15 Spray: Do not spray in enclosed space for example electrical cabinets. Ensure sufficient ventilation as explosive mixtures may form. After spraying, wait until solvent has evaporated.
    • Do not spray near naked flame, incandescent or hot objects. Observe additional application notes in the material safety data sheet and in the can label.
    • NSF H1 registered supporting process reliability
    • Good penetrative properties facilitating both quick disassembly of component parts and reduced down-time
    • Corrosion protection properties to maximise component life
    Characteristics  Klüberoil 4 UH1-15 Klüberoil 4 UH1-15 Spray
    Article number 029029 081240
    Composition, type of oil ester oil , synthetic hydrocarbon oil ester oil , synthetic hydrocarbon oil
    Colour space  yellow yellow
    Service temperature, lower limit -45 °C -45 °C
    Service temperature, upper limit 110 °C 110 °C
    NSF H1 registration number 136436 134124
    ISO viscosity grade, DIN ISO 3448, ISO VG 15 15
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 3.5 mm²/s approx. 3.5 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 15 mm²/s approx. 15 mm²/s
    Viscosity index, DIN ISO 2909 ≥ 120 ≥ 120
    Copper corrosion, DIN EN ISO 2160, 24 h, 100°C 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 60 months 36 months

     

    kluberoil-4-uh1-15.pdfkluberoil-4-uh1-15-en.pdf
    kluberoil-4-uh1-15.pdfkluberoil-4-uh1-15-en.pdf