Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

kluberfood nh1 74-401

Homepage > products > kluber > kluberfood nh1 74-401
Categories
  • chemicals and solvents
    • KLUBERFOOD NH1 74-401
    KLUBERFOOD NH1 74-401
    KLUBERFOOD NH1 74-401

    kluberfood nh1 74-401

    Synthetic long-life, high-temperature grease for the food and pharmaceutical industries.

    As a food producer or manufacturer of machines used in the food processing industry, you have to take care of many aspects: from machine reliability to compliance with regulations, from simplification of maintenance processes to cost savings. Klüberfood NH1 74-401 was developed for the lubrication of production facilities in food and pharmaceutical processing plants where incidental contact with the product cannot be excluded. With this product we have combined the high performance and load-carrying capacity of a synthetic base oil with the versatility of an innovative polyurea thickener. By using Klüberfood NH1 74-401 you can therefore attain long relubrication intervals in a large number of applications. Furthermore, this hightemperature grease offers you a wide service temperature range and can be applied in rolling bearings up to 160°C, or even at short-term peaks up to 180 °C where relubrication takes place at appropriate intervals. Klüberfood NH1 74-401 is NSF H1-registered and complies with FDA 21 CFR § 178.3570.

    Klüberfood NH1 74-401 can be used in many different foodprocessing sectors, e.g. bakery, pasta, beverage, meat and fish, tobacco, cereals, grains and oils.

    Applications include:

    • drive roller bearings in ovens and proofers
    • conveyors and motor bearings
    • roller bearings in packaging and labelling machines
    • camshafts, linear guides, and with sliding movements
    • Klüberfood NH1 74-401 is not approved for use in infant formula processing as this is not a focus market for this product.

    Klüberfood NH1 74-401 can be applied by standard commercial grease application equipment, e.g. spatula, grease gun or via centralised lubrication systems.

    Before applying Klüberfood NH1 74-401, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions. This is highly recommended to ensure food-safe lubrication.

    If the production process does not allow cleaning, we recommend the existing grease be replaced by purging the system during relubrication.

    Please do not hesitate to contact our technical consulting and sales departments for enquiries regarding grease miscibility, relubrication procedures, etc. If you wish to optimise the service life of your equipment or have any other questions regarding your application, our experts will be pleased to help you.

    • Enables cost saving and production reliability
      due to the prolonged service intervals also at medium to high temperature
      due to reduced lubricant quantities even under high loads
    • Enables reduced number of lubricants and use in numerous applications due to wide service temperature range
    • NSF H1 registered and in compliance with kosher and halal requirements
    • ISO 21469 certified – supports compliance with the hygienic requirements of your production
    Characteristics Klüberfood NH1 74-401
    Article number 096161
    Composition, thickener polyurea
    Composition, type of oil synthetic hydrocarbon oil
    Colour space beige
    Service temperature, lower limit -40 °C
    Service temperature, upper limit 160 °C
    NSF H1 registration number 154567
    Density, Klüber method: PN 024, 20°C approx 0.88 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 280 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 310 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹ Yaklaşık 3750 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx 40 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx 405 mm²/
    Copper corrosion, DIN 51811, 24 h, 120°C 1 - 120 - 24 corrosion degree
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
    Oil separation, DIN 51817 N, 168 h, 40°C ≤ 5 by weight %
    Flow pressure, DIN 51805-2, -40°C  ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 200 °C
    FAG FE9 rolling bearing test, DIN 51821-2, 1500 / 6000-160, service life F50 ≥ 100 h
    Speed factor (n x dm) approx 500000 mm/min
    Water resistance, DIN 51807-1, 3 h, 90°C 0 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    kluberfood-nh1-74-401.pdfkluberfood-nh1-74-401-en.pdf
    kluberfood-nh1-74-401.pdfkluberfood-nh1-74-401-en.pdf