WOLFRACOAT C SPRAY

Wolfracoat C Spray is suitable for use as an assembly paste to lubricate power-locking connections and low-speed (plain) bearings subject to high temperatures. Typical applications are in power plants, the steel industry, cement manufacture and similar industrial areas.
Prior to initial lubrication clean all friction points thoroughly and apply the product in an even, thin and extensive layer. Shake spray can well before use and provide for adequate ventilation while spraying. Do not spray against naked flame or onto hot or incandescent objects. Observe additional instructions for use in material safety data sheet and on can label.

Easier assembly and disassembly of power-locking connections
Reliable lubrication under mixed-friction and high-load conditions owing to ageing-resistant solid lubricants

Characteristics	WOLFRACOAT C Spray
Article number	081150
Composition	solid lubricant
Composition, thickener	silicate
Composition, type of oil	synthetic hydrocarbon oil
Colour space	grey
Service temperature, lower limit	-30 °C
Service temperature, upper limit	1200 °C
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	270 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	310 0.1 mm
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit	5000 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit	9000 mPas
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 110 mm²/s
Four-ball tester, welding load, DIN 51350-4	≥ 3000 N
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

kluber-wolfracoat-c-spray.pdf

Name and Surname

Company Name

Your E-Mail Address

Your Telephone Number

Your Message

I have read and understood the Kvkk and Information Text.