Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

summit pgs

Homepage > products > kluber > summit pgs
Categories
  • chemicals and solvents
    • SUMMIT PGS

    summit pgs

    Klüber Summit PGS compressor oils are based on polyalkylene glycols and special additives. In high-pressure piston compressors for natural gas or hydrocarbon process gas, mineral oils are easily absorbed into, and diluted by, the gas stream. By contrast, Klüber Summit PGS compressor oils are extremely resistant to such effects. The extremely high viscosity index of Klüber Summit PGS compressor oils 68 …, 150 ensures good lubrication in a wide range of temperatures.

    • Klüber Summit PGS compressor oils are suitable for piston, screwtype and rotary vane compressors for natural or process gas.
    • Klüber Summit PGS-2 is ideal for hydrocarbon gases of densities greater than 1.5 g/cm³ because this product is extremely resistant to dilution and absorption by hydrocarbon gases. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representative for specific viscosity recommendations.
    • Drain as much of the old compressor oil from the system as possible, making sure that the oil is drained while still warm. Do not forget to drain coolers, separator tanks and all lines. Next, clean or preferably change the filters.
    • Then recharge with the appropriate Klüber Summit PGS compressor oil.
    • We recommend attaching a label indicating the type and filling date of the lubricant to the filter or the compressor cover.
    • For the lubrication of piston, screw-type and rotary vane compressors for natural and process gas
    • Compared with mineral oils, extremely resistant to dilution and absorption by hydrocarbon gases
    • Klüber Summit PGS-2 is ideal for heavy gases (densities > 1.5 g/cm³)
    Characteristics Klüber Summit PGS 2 Klüber Summit PGS 68 Klüber Summit PGS 100 Klüber Summit PGS 150
    Article number 050026 050027 050028 050029
    Colour space yellow yellow yellow yellow
    Density, DIN 51757, 20°C approx. 1.15 g/cm³ approx. 1.04 g/cm³ approx. 1.05 g/cm³ approx. 1.06 g/cm³
    Flash point, DIN EN ISO 2592, Cleveland open cup approx. 240 °C ≥ 230 °C ≥ 230 °C ≥ 240 °C
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 11.4 mm²/s approx. 14 mm²/s approx. 19.6 mm²/s approx. 26.9 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 87 mm²/s  approx. 68 mm²/s approx. 100 mm²/s approx. 150 mm²/s
    Viscosity index, DIN ISO 2909 ≥ 111 ≥ 200 ≥ 200 ≥ 200
    Pour point, DIN ISO 3016 ≤ -30 °C ≤ -42 °C  ≤ -39 °C ≤ -36 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months 36 months 36 months

     

    kluber-summit-pgs.pdf