Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

kluberplex ge 11-680

Homepage > products > kluber > kluberplex ge 11-680
Categories
  • chemicals and solvents
    • KLUBERPLEX GE 11-680
    KLUBERPLEX GE 11-680
    KLUBERPLEX GE 11-680
    KLUBERPLEX GE 11-680
    KLUBERPLEX GE 11-680

    kluberplex ge 11-680

    Klüberplex GE 11-680 is an adhesive lubricant with a mineral oil base and an aluminium complex soap thickener. It is resistant to high pressure and contains anti-wear additives, corrosion and oxidation inhibitors. Klüberplex GE 11-680 is free of bitumen, solvents and raw materials containing lead.

    • Klüberplex GE 11-680 is designed for the lubrication of open and closed spur and bevel gears, lifting spindles, slideways and guideways, large chain drives and sliding bearings. It is particularly suitable for elevated component temperatures and wherever adhesive lubricants containing solid lubricants should not be used.
    • Klüberplex GE 11-680 should preferably be used for the lubrication of tooth flanks. It is applied to the gears through automatic spray systems. Smaller drives are also lubricated through positive drip-feed equipment, by brush or a hand spray equipment (e. g. with the Klübermatic LB spray gun). Splash lubrication is possible for components operating at low circumferential speeds (< 3 m/s).
    • Adhesive lubricant
    • Free of raw materials containing lead or solvents
    • Resistant to high pressures
    • FZG scuffing load stage > 12
    • Anticorrosion properties
    • Applicable through automatic lubrication systems
    Characteristics  Klüberplex GE 11-680
    Article number 039060
    Composition, thickener Aluminium complex soap
    Composition, type of oil mineral oil
    Colour space brown
    Texture very soft
    Service temperature, lower limit -20 °C
    Service temperature, upper limit 140 °C
    Density, Klüber method: PN 024, 20°C approx. 0.9 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 380 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 420 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 36 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 685 mm²/s
    Copper corrosion, DIN 51811, 24 h, 100°C 1 - 100 - 24 corrosion degree
    Flow pressure, DIN 51805-2, -20°C ≤ 1400 mbar
    FZG scuffing test, DIN ISO 14635-3, based on standard, A / 2.8 / 50, change of weight ≤ 0.2 mg/kWh
    FZG scuffing test, DIN ISO 14635-3, based on standard, A / 2.8 / 50, failure load stage > 12
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    kluberplex-ge-11-680.pdfklubersynth-ge-4-75w90.pdf
    • Klübersynth GE 4 75 W 90 is suitable for the lubrication of spur, bevel and hypoid gears that require maximum wear protection and service life, even when subjected to impact loads. Klübersynth GE 4 75 W 90 is suitable for drives in railway vehicles, industrial robots, textile machines and forming presses.
    • Klübersynth GE 4 75 W 90 can be applied by immersion, circulation and oil injection. It is also possible to use Klübersynth drip feed lubricators, brushes, oil cans or suitable automatic lubrication systems.
    • Abrasion load capacity is very high. API GL-5.
    • Provides excellent wear protection for gears and bearings.
    • It offers good viscosity stability for reliable lubricant film formation.
    • It shows high micropitting resistance.
    • It offers excellent aging and oxidation resistance.
    • It offers a wide operating temperature range thanks to its good viscosity-temperature behavior.
    • Its anti-foaming behavior is very good.
    • Particularly suitable for gears in railway vehicles - approved by Watteeuw, Voith Turbo, Siemens-Flender, Bombardier, Deutsche Bahn AG, Stadler and many others.
    Ürün Bilgisi Klübersynth GE 4 75 W 90
    Artikel Numarası 012117
    Çalışma Sıcaklığı, Alt Limit -40 °C
    Çalışma Sıcaklığı, Üst Limit  150 °C
    Yoğunluk, DIN 51757, 20°C Yaklaşık 0.86 g/cm³
    Parlama Noktası, DIN EN ISO 2592, Cleveland, Açık Kap ≥ 210 °C
    Flender Köpük Testi, Orijinal Yağ İle, Hacimde Artış ≤ 15 %
    Kinematik Viskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C Yaklaşık 18 mm²/s
    Kinematik vViskozite, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C Yaklaşık 130 mm²/s
    SAE - Viskozite Derecesi 75 W 90
    Viskozite İndeksi, DIN ISO 2909 ≥ 150
    Çelik Korozyonu, DIN ISO 7120 / ASTM D665, Yöntem A, 24 Hours, 60°C Pas Yok
    Akma Noktası, DIN ISO 3016  ≤ -42 °C
    API Aşındırma Yük Kademesi API GL 5
    FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Kafes Aşınması ≤ 200 mg
    FAG FE8 Rulman Testi, DIN 51819-3, D-7.5 / 80-80, Rulman Aşınması ≤ 30 mg
    Dört Bilya EP Testi, Kaynama Yükü, DIN 51350-2 ≥ 3000 N
    FZG Mikropitting Testi, FVA 54, GF-C / 8.3 / 90, Başarısız Yük Kademesi ≥ 10
    FZG Aşındırma Testi, DIN ISO 14635-1, A / 8.3 / 90, Başarısız Yük Kademesi ≥ 14
    Üretim Tarihinden İtibaren Minimum Raf Ömrü – Açılmamış Orijinal Ambalajında, Serin ve Kuru Yerde, Yaklaşık 36 Ay

     

    kluberplex-ge-11-680.pdfklubersynth-ge-4-75w90.pdf