Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubertemp 1-39 ht

Homepage > products > klüber > klubertemp 1-39 ht
Categories
  • chemicals and solvents
    • KLUBERTEMP 1-39 HT

    klubertemp 1-39 ht

    As an operator of heat-carrier systems you have high expectations in terms of process reliability and safe operation. Hence, selecting the appropriate heat-transfer fluid is of utmost importance. Klübertherm 1-39 HT is an efficient heat-carrier fluid for closed systems, which meets the high requirements in terms of thermal stability.

    Contrary to standard mineral oils, Klübertherm 1-39 HT contains highly refined hydrotreated heavy paraffinics to attain the high  thermal stability of this heat-transfer fluid. Klübertherm 1-39 HT also stands out for its low vapour pressure and high oxidation stability. Therefore, Klübertherm 1-39 HT significantly contributes to reducing maintenance costs and extending oil change intervals.

    • Extended oil change intervals achievable due to highly refined paraffinic base oils
    • Reduced maintenance efforts and dependable operation due to high thermal stability
    • Low residue formation due to the high thermal and oxidation stability
    Characteristics Klübertherm 1-39 HT
    Article number 029101
    Composition, type of oil hydrotreated mineral oil (API group II)
    Maximum film temperature 340 °C
    Minimum Operating Temperature, 20 mPas 55 °C
    Minimum Start-up Temperature, 300 mPas  5 °C
    Service temperature, upper limit 310 °C
    Classification Q, ISO 6743-12  QC
    Density, DIN 51757, 15.6°C approx. 0.86 g/cm³
    Flash point, DIN EN ISO 2719, Pensky-Martens closed cup ≥ 204 °C
    Vapour pressure, 290°C, Bibliographical value (for information only) ≥ 204 °C
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C  approx. 43 mm²/s
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 60 months

     

    klubertemp-1-39-ht.pdf
    • Klübertherm 1-39 HT is exclusively recommended as a closed-loop heat-transfer fluid.
    • Thanks to its performance characteristics Klübertherm 1-39 HT can be used in various industries such as wood, textiles, chemicals, automotive, asphalt, cement.
    • Klübertherm 1-39 HT can be applied in new systems without prior cleaning, except when required for reasons of product quality. Residues of varnishes, oils and others originating from the system installation are usually not enough to affect the fluid lifetime. We strongly encourage you to take an oil sample in order to conduct laboratory analysis. Please check with your Klüber representative to assist you. Klübertherm 1-39 HT is normally compatible with common heat-transfer fluids.
    • The start-up procedure or cleaning process should be done in compliance with the documentation of the manufacturer of the heat transfer system. In the presence of inert gas, the operating time of this fluid may be considerably extended. It is highly recommended to analyse the oil every 6 months to allow a reliable and efficient operation of your heat transfer system.
    • If you have any further questions please do not hesitate to contact us.