Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

constant gly 2100

Homepage > products > kluber > constant gly 2100
Categories
  • chemicals and solvents
    • CONSTANT GLY 2100

    constant gly 2100

    As bearings are repeatedly started and stopped, their speed varies or their sense of rotation is continuously reversed, the hydrodynamic oil film in the friction point will collapse at intervals. If this goes on for a certain period of time, premature wear will be the consequence. To reduce this effect, CONSTANT GLY 2100 contains an additional soap such that mixed friction is largely prevented.

    The advanced speciality lubricant design provides lifetime lubrication over a wide service temperature range, with added reserve capacity for low temperatures.

    The excellent anticorrosive effect of CONSTANT GLY 2100 fluid enables trouble-free operation of both iron and bronze bearings.

    • CONSTANT GLY 2100 is intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.
    • The pores of sintered metal plain bearings are filled with CONSTANT GLY 2100 by means of vacuum immersion. The fluid should not be filtered too finely. For a longer service life, the ready-to-use product MIKROZELLA G8 OY K can be applied to the circumference of the bearing by means of conventional, fully automatic lubricating systems. We recommend conducting a metering test in the original dosing device under practical operating conditions.
    • Longer component life due to good ageing resistance and thermal stability
    • Smooth-running fluid
    • Good low-temperature behaviour prevents creaking noises
    • Extended bearing life due to reduced starting-up wear
    • Enables energy savings due to low starting and running torques
    • Excellent ageing stability due to low internal heating even at high speeds
    • Versatile uses due to good compatibility with elastomers
    • Additional wear protection due to matching soap
    Characteristics CONSTANT GLY 2100
    Article number 028049
    Colour space brown
    Texture homogeneous , very viscous
    Service temperature, lower limit -40 °C
    Service temperature, upper limit 140 °C
    Density, DIN 51757, 20°C approx. 0.83 g/cm³
    Refractive index, DIN 51423-2 / ASTM 1218, 20°C approx. 1.464
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 9 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 55 mm²/s
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    kluber-constant-gly-21001.pdf