Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

unisilkon tk m

Homepage > products > klüber > unisilkon tk m
Categories
  • chemicals and solvents
    • UNISILKON TK M
    UNISILKON TK M
    UNISILKON TK M

    unisilkon tk m

    UNISILKON TK M 1011 and UNISILKON TK M 1012 are lubricating, sliding and sealing agents based on silicone oil. They offer high thermal stability, are insoluble in water and resistant to many ambient media.

    UNISILKON TK M 1011 can be used as lubricating, sliding and sealing agent for all types of gas burning installations including their accessory parts which are in contact with fuel gas, e.g. valves, taper plug valves, ball valves in cookers and heaters.

    • Lubricant for sealing elements, to increase sliding capacity and reduce abrasion e.g. in plastics taps
    • Press-in and mounting aid for O-rings, packings
    • Sliding and sealing paste e.g. for ground-glass and taps in laboratories of the chemical industry
    • Insulating agent for high dielectric breakdown strength in substations and switching stations to prevent arcing

    Clean and degrease surfaces. Apply a thin layer to the entire surface by means of brush, spatula or cloth which does not fray.

    • High thermal stability
    • Good resistance to low temperatures
    • Resistant to ambient media
    • Good water resistance
    Characteristics UNISILKON TK M 1011 UNISILKON TK M 1012
    Article number 022089 022090
    Composition, thickener silicate silicate
    Composition, type of oil silicone oil silicone oil
    Appearance transparent transparent
    Colour space white white
    Service temperature, lower limit -40 °C -40 °C
    Service temperature, upper limit 160 °C 160 °C
    Density, Klüber method: PN 024, 20°C approx. 1.05 g/cm³ approx. 1.05 g/cm³
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 15000 mPas 20000 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 22000 mPas 46000 mPas
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months 12 months

     

    kluber-unisilkon-tk-m.pdf