Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

structovis bhd

Homepage > products > klüber > structovis bhd
Categories
  • chemicals and solvents
    • STRUCTOVIS BHD

    structovis bhd

    Mineral oil-based special lubricants.

    STRUCTOVIS HD is a special lubricant series based on mineral oil and available in different viscosity grades.

    The STRUCTOVIS types AHD to EHD, BHD MF and BHD 75 S contain special adhesion improvers, the type BHD MF the solid lubricant MoS2 for improved emergency lubricating properties.

    STRUCTOVIS BHD 75 S contains a flammable solvent. All STRUCTOVIS HD types offer good wear and corrosion protection.

    The STRUCTOVIS types provided with an adhesion improver are extremely adhesive thus reducing considerably the risk of contamination due to oil leakage, especially at high chain speeds.

    The STRUCTOVIS types of higher viscosity (AHD to CHD) may also reduce noise of chains.

    Note: The product data of STRUCTOVIS BHD Spray and STRUCTOVIS BHD 75 S refer to the solvent-free active agent

    • STRUCTOVIS HD lubricants are used for driving, control and conveyor chains. STRUCTOVIS BHD and BHD 75 S have proven particularly effective for the initial lubrication of steel link chains by the chain manufacturer.
    • Depending on the viscosity STRUCTOVIS HD can be applied by drip-feed or automatic lubrication systems, oil feeders or brush. When using automatic systems please observe the maximum viscosity specified by the manufacturer. If STRUCTOVIS BHD is applied by the chain manufacturer we recommend an immersion bath temperature between 80 and 90 °C. The low-viscosity HD types (up to 460 mm²/s at 40 °C) and BHD 75 S (please also observe safety data sheet) can also be applied in a cold-bath process. The chain should remain in the bath until no more air bubbles rise to the surface.
    • Good wear protection
    • Good corrosion protection
    • Adhesive
    • Noise dampening (depending on viscosity)
    • Emergency lubricating properties (BHD MF)
    Characteristics STRUCTOVIS AHD STRUCTOVIS BHD STRUCTOVIS BHD MF STRUCTOVIS BHD 75 S
    Article number 016001 016002 002027 015061
    Colour space brown brown black brown
    Service temperature, lower limit  0 °C -5 °C -5 °C -5 °C
    Service temperature, upper limit 120 °C 120 °C 120 °C 120 °C
    Density, DIN 51757, 20°C approx. 0.91 g/cm³ approx. 0.91 g/cm³  - approx. 0.88 g/cm³
    ISO viscosity grade, DIN ISO 3448, ISO VG  -  -  -  -
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 7500 mm²/s approx. 4750
    mm²/s    		 approx. 4750 mm²/s approx. 4750 mm²/s
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx 24 months 24 months 12 months 24 months

     

    Characteristics STRUCTOVIS
    BHD Spray    		 STRUCTOVIS
    CHD    		 STRUCTOVIS
    EHD    		 STRUCTOVIS FHD
    Article number 120108 016003 016005 016006
    Colour space brown yellow brown brown
    Service temperature, lower limit  -5 °C -5 °C -5 °C -10 °C
    Service temperature, upper limit 120 °C 120 °C 120 °C 120 °C
    Density, DIN 51757, 20°C approx. 0.91 g/cm³ approx. 0.91 g/cm³ approx. 0.89 g/cm³ approx. 0.89 g/cm³
    ISO viscosity grade, DIN ISO 3448, ISO VG  -  -  - 150
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 4750 mm²/s approx. 2000 mm²/s approx. 460 mm²/s approx. 150 mm²/s
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx 36 months 24 months 24 months 24 months

     

    Characteristics STRUCTOVIS FHD Spray STRUCTOVIS GHD
    Article number 081340 015014
    Colour space brown brown
    Service temperature, lower limit  -10 °C -10 °C
    Service temperature, upper limit 120 °C 120 °C
    Density, DIN 51757, 20°C approx. 0.89 g/cm³ approx. 0.89 g/cm³
    ISO viscosity grade, DIN ISO 3448, ISO VG  -  -
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 150 mm²/s approx. 68 mm²/s
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx 36 months 24 months
    kluber-structovis-bhd.pdfkluber-structovis-bhd-en.pdf
    kluber-structovis-bhd.pdfkluber-structovis-bhd-en.pdf